Quote:
Originally Posted by 78F350
The harness for the rear brakes goes to a yellow connector that is on the left side firewall in the trunk. If you are running wires for the rear camera, this is a good time to get a look at it anyway.
Just pull the trunk liner away from the firewall and you'll see three or four large rectangular connectors together in the left corner. It's kind of a pain to get them separated and access the pins, but it is 'cleanest' way to replace the harness.
I'll try to get pics and remove the harness tonight.
|
Thank you, I'v been working on this car non-stop for the last few months, (thank god for Quickjack) and I think I'm just going to leave it alone until the light comes back on. Since it seems to be a pinched wire, it will probably come back on but we'll see.
I bought a de-pin kit just in case it comes back on in the future.