View Single Post
Old 04-06-2021, 06:35 PM   #2
986andmx5
Registered User
 
Join Date: Apr 2021
Location: Southeast PA
Posts: 50
I have things moving in the right direction or so I hope! I removed the clamshell which allowed me to pop back in the ball on the driver side where it belongs on the sliding track. With the top in maintenance position I reattached the bolt end of the black hydraulic arm on the passenger side with 17mm open ended wrench. Ops checked good.

When I went to replace the clamshell it was twisted, so I have to work on getting that sorted. Hopefully if that goes well everything will operate smoothly.
986andmx5 is online now   Reply With Quote