Quote:
Originally Posted by Jeturne
Hi Jasper,
You can take a nail file or an exacto knife and shave a little bit off of those tabs to get it to twist into place. It doesn't take too much and it will hold in place quite nicely
Good luck
|
Thank you so much for the tip, I used a box cutter and shaved a tiny bit off each tab. Basically the tabs come to a hooked point and I shaved the point off on each end.
It took just a firm twist and twisted right in.
Now that it's in, it will wiggle left/right just a tab but will not untwist.
Thanks again, brake light working again
