Quote:
Originally Posted by Cunningr
You have to buy a mirror assembly, they basically pop out but there are some wires inside so needs some soldering to be done right. Easily to take off the sun visor and work on a table. Remove 3 hex bolts but carefully.
|
Used visors from a later 987/997 work just fine to scavenge the mirrors from. No soldering is required to remove the mirror assembly and swap it into the Boxster's visors. Once the assembly is released (two tabs along the bottom edge, use a plastic trim tool to release) the mirror can be removed and then the contact bars can be removed. Same process to install.