Sorry for all the panic posts this afternoon, project turned out to be much harder than expected.
Unfortunately it seems my project is taking a turn sideways. I bought a donor amp and wired it up based on some diagrams I found on the site but they appear to be different than my plug. Mine plug is totally different, appears that pins 9 and 10 are power/ground and (8/17), (7/16), (6/15) and (5/14) are speaker wires and I am not wired for rear speakers. I'm beyond frustrated/disappointed, mainly because I didn't verify my plug prior to created my harness. So I guess back to the drawing boards tomorrow.
