View Single Post
Old 05-26-2018, 06:37 AM   #1
AZ986S
Registered User
 
AZ986S's Avatar
 
Join Date: Jun 2016
Location: Arizona
Posts: 379
Last HPDE for the season @ AMP

Here's the full length video with comments.
This was the first session of the day and the air temp was already getting very hot, so eventually I had to back off in the second and third sessions since I was seeing oil temps of 245-250F, highest I've seen in this car.
In the first 1/3 of this session, I was trying to pass a C5 corvette with more straightaway power. I think I have to work on being a little more direct in my intentions... But I also wonder if the corner workers are actually paying attention...

For the next season, I'm installing racing seats, harnesses, a fire extinguisher and getting a HANS. PCA is requiring both sides to be the same. For data, I want to install an oil temp sensor so I can data log it. I think my engine oiling is adequate for now.

https://www.youtube.com/watch?v=-u7VRbvnpj4
__________________
2002 Boxster S - NHP 200 Cell Headers,test pipes,Borla CatBack,Competition Plenum,74 mm TB, EVOMS Tune,Tarett UDP,Eibach Swaybars,BIlstein PSS9s,TuneRS rear toe links,wheel studs,15 mm wheel spacers on all 4,EBC yellow stuff pads,Sebro rotors, EBS oil baffles,160 deg Thermostat,2 quart Accusump,full filtration remote oil filter,rad fan switch,custom gauge/switch plate, Race Capture data logging, 90K miles

Last edited by AZ986S; 05-26-2018 at 06:51 AM.
AZ986S is offline   Reply With Quote