Quote:
Originally Posted by BoomerRoadie
Meir et all,
Yeah, I did get the blue connectors swapped out. I also don't car about using the CD change.
I just can't figure out how to program it  |
this one is for the 220. see if it works.
To enable AUX on CDR-220;
1. Turn radio on
2. Press and hold the "TP" button for about 8 seconds until "Becker 1" is displayed.
3. Turn the Tuning Knob until AUX OFF is displayed.
4. Press either button located directly under the Arrows on the display to
change the present setting from OFF to ON.
5. Turn radio OFF.
6. Turn Radio back ON and press S button to select AUX Mode.