Thread
:
new member
View Single Post
06-05-2016, 11:38 AM
#
9
Joe toth
Registered User
Join Date: May 2016
Location: Surrey, B.C.
Posts: 69
Finally managed to get some work done on the Boxster front aero. The pattern for the splitter and dive planes is more or less complete. I am going to test fit on a couple more cars to verify my bumper is not out of spec (ie: bent, warped etc) then I start making the mold. I put some white paper in front of the splitter in an attempt for better contrast against the pavement and to show ground clearance for stock ride height.
Joe toth
View Public Profile
Find More Posts by Joe toth