[littlewiggler]

I drove down to Dallas from SLC last week and am making the return trip today.

I have an 03 Boxster 2.7 with 63k miles.
I had the complete 60k done service a week before I left.

I made it to Albuquerque and noticed that it would no longer hold idle speed. I could keep it running, but had to do a lot of heel/toe. Any time the RPM's got lower than 1k it stalled.

I got to my hotel and hooked up my Durametric.

No CEL/ error lights, but I got 2 codes:

P1341
Fault code 900 - inlet camshaft bank 1

I cleared it and restarted. It ran roughly for a second and threw this:

P0011
Fault code 332 - Camshaft position with respect to crankshaft bank 1

I could take it to the local Porsche dealer, but they said it could be a day or two to get to it. I don't have my tools with me and no where to work on it.

Thoughts?

Would you risk driving it back to SLC if this was your car?

Thanks
John