|
Darn Bumperettes
I went to go apply a light layer of Armor All to my fading bumperettes today,and it turned into a darn chore. One bumperette came loose via the Torx screw holding it into place with no problem,cleaned,Armor Alled, reinstalled no problem. The second bumperette on the driver side would not budge one bit when I tried to loosen it. I tried to loosen it for another 10 minutes but no luck. I finally decided to just clean and apply Armor All where I could. Does anyone have any secrets on how to loosen the torx holding the bumperette on?
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house 
|