986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post - how to adjust headlight housing "height"?

chiefsalami · 05-30-2006, 02:19 PM

Hi Jim,
The fender looks fine, with everything even. I see that the tray that holds the lights in is bolted to the inner fender, but with what seems like a threaded screw into a round nubbed nut. The screw accepts a star-point driver (T15), but it is VERY tight and very difficult to turn. And I can't tell that it's doing anything to the light position.

So I'm wondering what it is about this light and why it sits sunken down like that.

05-30-2006, 02:19 PM	#5
chiefsalami Registered User Join Date: May 2006 Location: Portland, OR Posts: 112	Hi Jim, The fender looks fine, with everything even. I see that the tray that holds the lights in is bolted to the inner fender, but with what seems like a threaded screw into a round nubbed nut. The screw accepts a star-point driver (T15), but it is VERY tight and very difficult to turn. And I can't tell that it's doing anything to the light position. So I'm wondering what it is about this light and why it sits sunken down like that.