started skinning a load of interior parts in carbon! Armrest lid, centre console parts, ashtray surround and lid, alarm light cover, ignition barrel surround, fuse box cover and some door parts! All in various states of fit and finish in these photos!
And also finally found my cup holders and modified a spare vent I had to make sure it was easy enough to do! Another cool little OEM touch!
here are finished pictures of the carbon parts!! worked out that this lot is $1326 if purchased from an online store that sells a lot of carbon stuff!
still learning but I'm massively happy with how this lot has turned out!
so i have fitted some of the carbon parts to the car and i am very happy with how they look in place!
ashtray and corners of centre tunnel. when i first put the ashtray in the surround i was thinking oh **************** i've done the weave the wrong way, but i actually like how they are opposing!
and the bits above the handles
i'vr fitted the fuse box cover but its down by the pedals and very dark for photos.... going to try and get the armrest on this weekend! quite fancy doing some other bits too.... i want to try and do the door handles on the outside but just the lift up bit and maybe the petrol flap too.... and the spoiler... because the car is dark blue i think i'll get away with it
and also i managed to pick up a set of wheels on ebay for a real good price! these are Porsche Sport Classic II's. 7.5 and 9 x 18 et 50 and 52 respectively... hopefully get these fitted asap and get the car lowered again! might try and find spacers at some point for the rears to get it sitting nice and looking nice and wide! they could be doing with a refurb on the lip but that will come in due course! and these might not end up being the forever wheel for the car but at the price i couldnt pass them up!
