986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post - 997 GT3 front end conversion and rear widebody

der Geist · 11-10-2015, 04:19 AM

I had a bumper like the precision911 one on my Boxster. I'm probably going to selling it if you are interested. Everything went fine on the install, it mounts with the same screws for the most part. I had to drill holes for the screws inside the turn signal housings but that's about it as far as I can recall. I just removed the headlight assemblies, installed the bumper and re-installed the headlight assemblies, no problems at all.

The 997 conversion is really expensive and if you are switching headlights add at least $1000.00 to the cost for the headlights alone.

Pretty expensive upgrade if you are not doing the work yourself.

11-10-2015, 04:19 AM	#3
der Geist Registered User Join Date: Mar 2006 Location: Lakewood, Ohio / Sedona, AZ Posts: 305	I had a bumper like the precision911 one on my Boxster. I'm probably going to selling it if you are interested. Everything went fine on the install, it mounts with the same screws for the most part. I had to drill holes for the screws inside the turn signal housings but that's about it as far as I can recall. I just removed the headlight assemblies, installed the bumper and re-installed the headlight assemblies, no problems at all. The 997 conversion is really expensive and if you are switching headlights add at least $1000.00 to the cost for the headlights alone. Pretty expensive upgrade if you are not doing the work yourself. __________________ http://www.martinlansky.com/Coppermi...01/W_humps.jpg '03 Midnight Blue 18" Chromes//Drilled and slotted rotors//pedal upgrade//Alum. Door sills//KSPORT Coilovers//Short Shifter/Strut braces/Clear sides/Hard Top/Speedster humps/Intake//Leather GT3 seats/REVO chip with SPS2 '04 CLK55 AMG 367HP! '86 944 Guards Red & MINT! '69 911 Black PCA Member -Northern Ohio Cancer Survivor