|
thstone, thx for the link. Great info. I'll move forward this morning.
I'll look closer but on initial inspection it appeared the lower rubber edge on the wings causes the baffle to be too high for the mounting plates (gap between). Do I just tighten the bolts down or trim the rubber for a perfect fit?
How long should the gasket cure before putting in oil and running? Didn't see this on the tiny instructions on the gasket tube.
__________________
GPRPCA Chief Driving Instructor
2008 Boxster S Limited Edition #005
2008 Cayman S Sport - Signal Green
1989 928 S4 5 spd - black
|