View Single Post
Old 11-24-2013, 04:24 PM   #3
Tucker2
Registered User
 
Tucker2's Avatar
 
Join Date: Nov 2013
Location: Seattle
Posts: 274
Garage
I recently took out both headlight assemblies while troubleshooting an issue with the bodywork.

Anyway....per instructions from an independent, I lubricated (WD40) all the rails/parts that come into contact with each other when sliding the headlights back into the body.

For kicks....I tried with w/o the WD40 and it simply would not work. WITH WD40, the assemblies slid in very easily and locked down equally easily. I did not have to use 'hard' force. Firm....yes....hard....no.

Once the assemblies were mostly in....I wiggled the release key back and forth while pushing on the lights until they fully clicked in place and I locked them in with the key.

Good luck.
__________________
Current: 981 Cayman
Former: '02 BS and '08 C
Tucker2 is offline   Reply With Quote