986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

thstone · 12-18-2012, 08:50 PM

My concern is that you probably need a lot more camber than a device like this is likely to provide.

If you're looking for a cheaper solution than adjustable LCA's, I'd recommend camber plates which will allow about -1.75 to -2.0 degrees (total) on the stock suspension. At $475 plus installation they are the best affordable route to more negative camber.

But the camber plates alone won't get you to an optimal -2.5 to -2.75 degrees of camber but its a good start (this is based on handling quality alone; this much camber for a car that never see a track might not be optimal for other factors like tire wear). Its all a trade off.

Camber Plates and Monoballs-Rennline, Inc.

12-18-2012, 08:50 PM	#2
thstone Certified Boxster Addict Join Date: Nov 2010 Location: Los Angeles Posts: 7,669	My concern is that you probably need a lot more camber than a device like this is likely to provide. If you're looking for a cheaper solution than adjustable LCA's, I'd recommend camber plates which will allow about -1.75 to -2.0 degrees (total) on the stock suspension. At $475 plus installation they are the best affordable route to more negative camber. But the camber plates alone won't get you to an optimal -2.5 to -2.75 degrees of camber but its a good start (this is based on handling quality alone; this much camber for a car that never see a track might not be optimal for other factors like tire wear). Its all a trade off. Camber Plates and Monoballs-Rennline, Inc. __________________ 1999 996 C2 - sold - bought back - sold for more 1997 Spec Boxster BSR #254 1979 911 SC POC Licensed DE/TT Instructor Last edited by thstone; 12-18-2012 at 08:57 PM.