Quote:
|
Originally Posted by brp987
"Tolerable" is subjective. Is there anyone out there who has gone from stock to Eibach, or from Eibach to ROW M030 who can describe the difference?
|
Of course. Any description will be subjective from the perspective of the driver unless a car has been tested in the Penske suspension lab or a similar technical analysis is done.
Here is my own subjective observations while instructing in other peoples cars. My interest is focused on ride quality, performance and handling and I don't really care about car show quality fender well gaps etc.:
1. Eibach lowering springs- Too low and introduced alignment and bump-steer issues. Difficult to get right.
2. M030 ROW- These cars always feel good with a balance of street driveability and better front grip/easy rotation for performance driving. The ride is firm but still good.
3. PSS9s- Very dependent on setup. I have been in cars with well sorted PSS9 suspension that felt great and cars (usually owner installed) that were scary, unpredictable and awful. I don't recommend a DIY install. Set to full soft for street use and the ride is very good.
I hope you find this useful.