View Single Post
Old 07-16-2010, 05:12 AM   #2
GTA_G20
Registered User
 
GTA_G20's Avatar
 
Join Date: Jan 2008
Location: St Catherines, Ontario
Posts: 435
You need to start by removing the rear spoiler first.

-Raise the spoiler manually w/ the switch near the dead pedal(or the rear spoiler switch if you've done that mod)

-Open the rear trunk so you don't mess it up while work

-Get a center punch,small nail or something you can tap the middle of the three rivets out with

-remove the rear spoiler cover

-Remove the two bolts located inside the spoiler by looking downwards within the spoiler

-Lift and remove spoiler

Now removing the rear bumper

-Remove the bumperettes by releasing their bolt. You can see the bolt when you get on the ground and look on your back

-remove the wheel well housing screw, 1/side

-remove the three screws located on the bottom of the bumper, 3/side

-remove the screws from the license plate lighting,2/per light

-release the lights from the bumper



thanks to Blinkwatt
__________________
2006 Audi A4 Avant 2.0t Quattro
1997 Boxster Glacier White w/facelift(gone but not forgotten)
2004 Boxster S 550 Spyder Anniversary Edition

Last edited by GTA_G20; 07-16-2010 at 05:17 AM.
GTA_G20 is offline   Reply With Quote