986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

blue2000s · 09-19-2008, 06:16 PM

Here's the standard 9x7 on my 2000. You can see, the pivot point is just slightly higher than the 9x6 stock, maybe a bit less than 1/4", and it uses the metal plate, like the 9x7SSK on the side-to-side.

I had the B&M clone before I installed this and thought I was happy. But after using this shifter, I have absolutely no desire for anything else.

09-19-2008, 06:16 PM	#46
blue2000s Porscheectomy Join Date: Mar 2006 Location: Seattle Area Posts: 3,011	Here's the standard 9x7 on my 2000. You can see, the pivot point is just slightly higher than the 9x6 stock, maybe a bit less than 1/4", and it uses the metal plate, like the 9x7SSK on the side-to-side. I had the B&M clone before I installed this and thought I was happy. But after using this shifter, I have absolutely no desire for anything else. Last edited by blue2000s; 09-19-2008 at 06:20 PM.