986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post - Pioneer AVIC-F700BT Problem

PaulSeales · 09-10-2008, 01:16 AM

The ISO connector did have two connectors. One that plugs into the amplifier (blue\green\yellow block - only the amp wiring is used however) and one which attaches to the speakers (both blocks)

I Have spoken to him about the problem but he's stumped.

I pm'd trieullionaire and I have his connector and instructions already (I bought his kit from ebay) but the F700BT has 1 pre-out which is for a subwoofer only - so I cannot use that harness.

Could I gorund the amplifier by just holding some wire on the chassis of the amp to a ground point somewhere in the car to see if resolves the problem? Do do I have to cut the brown wire to the amp?

Thanks for responding.

Paul.

09-10-2008, 01:16 AM	#5
PaulSeales Registered User Join Date: Mar 2008 Location: Essex, UK Posts: 12	The ISO connector did have two connectors. One that plugs into the amplifier (blue\green\yellow block - only the amp wiring is used however) and one which attaches to the speakers (both blocks) I Have spoken to him about the problem but he's stumped. I pm'd trieullionaire and I have his connector and instructions already (I bought his kit from ebay) but the F700BT has 1 pre-out which is for a subwoofer only - so I cannot use that harness. Could I gorund the amplifier by just holding some wire on the chassis of the amp to a ground point somewhere in the car to see if resolves the problem? Do do I have to cut the brown wire to the amp? Thanks for responding. Paul.