Any header made for a 986 is too small for the 3.6. With the 3.6 Porsche enlarged the exhaust ports size significantly. Previously the 996 3.4 and 986 engines used the same size exhaust ports so using a set of 3.2S performance headers was a good solution. Not so with the 3.6 and 3.8 swaps. This obviously ignores the primary size and length, which are also wrong for a 3.6 on the 986 based headers.
-Todd
__________________
Current Cars:
1989 911 Targa
1984 944 Original Owner
1971 911T
|