986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post - Sway-bar size...?

blinkwatt · 10-28-2007, 09:46 PM

I believe that S-spec RoW 030 front sway bar is 24mm thick,the Eibach is 24mm thick as well. Ordering the RoW 030 sway bar with bushings is a lot less then the Eibach,just something to consider. Now for the front your best bet is 2.5L/2.7L RoW 030 sway bar,the Eibach rear sway bar is the same as the S-spec,which is smaller then the 2.5L/2.7L RoW.

You may want to take a look at
http://www.cb-racing.com/boxster_030.html

http://cgi.ebay.com/ebaymotors/EIBACH-ANTI-ROLL-KIT-SWAY-BAR-PORSCHE-BOXSTER-97-03_W0QQcmdZViewItemQQcategoryZ33592QQihZ015QQitemZ 250152670518QQrdZ1QQsspagenameZWD1V

10-28-2007, 09:46 PM	#2
blinkwatt Registered User Join Date: Sep 2005 Location: Sacramento Posts: 3,417	I believe that S-spec RoW 030 front sway bar is 24mm thick,the Eibach is 24mm thick as well. Ordering the RoW 030 sway bar with bushings is a lot less then the Eibach,just something to consider. Now for the front your best bet is 2.5L/2.7L RoW 030 sway bar,the Eibach rear sway bar is the same as the S-spec,which is smaller then the 2.5L/2.7L RoW. You may want to take a look at http://www.cb-racing.com/boxster_030.html http://cgi.ebay.com/ebaymotors/EIBACH-ANTI-ROLL-KIT-SWAY-BAR-PORSCHE-BOXSTER-97-03_W0QQcmdZViewItemQQcategoryZ33592QQihZ015QQitemZ 250152670518QQrdZ1QQsspagenameZWD1V __________________ -99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway -01' S Orient Red Metallic 6-spd...money pit...sold to buy a house