Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Show and Tell Gallery

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-21-2019, 06:20 AM   #41
Registered User
 
BruceH's Avatar
 
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,708
Garage
Looks fantastic, nice work.
What was the problem with the windows earlier in the thread?

__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
BruceH is offline   Reply With Quote
Old 03-21-2019, 09:26 PM   #42
Registered User
 
Join Date: Jul 2018
Location: Los Angeles
Posts: 91
Quote:
Originally Posted by Lemming View Post
Looks awesome!
phook is offline   Reply With Quote
Old 03-22-2019, 02:23 AM   #43
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
Quote:
Originally Posted by BruceH View Post
Looks fantastic, nice work.
What was the problem with the windows earlier in the thread?
It was fuse C3.
__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)
Lemming is offline   Reply With Quote
Old 03-22-2019, 06:20 AM   #44
Registered User
 
BruceH's Avatar
 
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,708
Garage
Quote:
Originally Posted by Lemming View Post
It was fuse C3.
Love it when it is something simple 👍🏻
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
BruceH is offline   Reply With Quote
Old 03-25-2019, 07:49 AM   #45
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
Codes P1128 and P1130 popped up over the weekend after some spirited driving. Pulled the MAF and gave it a good cleaning, so far the codes have not come back. Fingers crossed.
__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)
Lemming is offline   Reply With Quote
Old 03-27-2019, 04:42 AM   #46
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
Codes came back yesterday. Hooked up the durametric and found that the TRA's were trimming fuel (-.36) so the car was running rich at high RPMS. Pulled the MAF from the my SPB, installed and the car ran great. On the left is the SPB maf, and on the right is the DD maf. Notice the browning at the curvature. The DD car came with a K&N air filter, which I'm guessing had been over oiled at times, causing the buildup on the maf. Cleaned it again and it's back in the car, if the code comes back again (which I'm guessing it will), time for a new maf.
__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)

Last edited by Lemming; 04-04-2019 at 06:36 AM.
Lemming is offline   Reply With Quote
Old 03-29-2019, 07:38 AM   #47
Registered User
 
Join Date: Jun 2014
Location: LB, Germany
Posts: 1,453
Pipercross offers sport air filters that work without oil. Seem also to be available in the US:

Pipercross Performance Air Filters
Pipercross Performance Air Filters
__________________
My Porsche keyfob, instrument cluster and alarm ecu repair service: https://sportwagendoktor.de
Smallblock454 is offline   Reply With Quote
Old 03-29-2019, 09:01 AM   #48
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
Going back to stock air filter. I've have a new MAF on the way was well.
__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)
Lemming is offline   Reply With Quote
Old 04-12-2019, 09:07 AM   #49
Registered User
 
Join Date: Jan 2019
Location: Orlando
Posts: 21
Very nice. I have a very similar project car from copart. I got it for $1500, but with shipping and fees the cost was $2900. I got it up and running.

How much did you pay for your boxster? Also I noticed that you mentioned that there is some cover for cd player besides the double DN kit because I have an aftermarket player, but there are some holes around it.

Here is my first video of my Porsche
https://www.youtube.com/watch?v=QLnrIsGiTKw

I decided to do bunch of DIY videos if you'll need any help with repairs, but seems like you're almost done
pahanorlando is offline   Reply With Quote
Old 04-22-2019, 07:06 AM   #50
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
I paid $2650, plus fees and a trip to Philly and back to get it.

Car is running great since putting a stock filter and new MAF in the car. I've got a G01 trans lined up from a '00 car that will be dropped in so I can save the G00 trans as a spare for my SPB car. Still looking for a good deal on a 3.2L engine, but starting to collect the parts I need for the engine swap.
__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)
Lemming is offline   Reply With Quote
Old 02-28-2021, 07:12 AM   #51
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
This car has worked well since my last post, has just over 60K original miles. I originally bought the car for the engine and trans as spares for my SPB. Well the time has come to do just that as I found a crashed 2001 S nearby and I bought it (97K miles). I'm currently stripping the S, my plan is to transplant the engine and trans and part out what I don't want.


__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)
Lemming is offline   Reply With Quote
Old 02-28-2021, 03:43 PM   #52
Registered User
 
Join Date: Jul 2013
Location: Bastrop, Tx
Posts: 2,643
Don't forget to grab and use the complete S coolant tubes from the front to the back. It's my opinion that the tubes are more important than the third radiator. The 996 doesn't come with a third radiator but it does have the larger tubes. Porsche started using the larger tubes for the base 2003+ tiptronic boxsters too. I've seen a few racers regret not converting over when they had a chance

Didn't see you at COTA this weekend?
__________________
Woody
itsnotanova is offline   Reply With Quote
Old 03-03-2021, 10:23 AM   #53
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
Quote:
Originally Posted by itsnotanova View Post
Don't forget to grab and use the complete S coolant tubes from the front to the back. It's my opinion that the tubes are more important than the third radiator. The 996 doesn't come with a third radiator but it does have the larger tubes. Porsche started using the larger tubes for the base 2003+ tiptronic boxsters too. I've seen a few racers regret not converting over when they had a chance

Didn't see you at COTA this weekend?
Great suggestion, I did not realize that there was a difference in tube size. The center radiator was damaged in the crash, so am looking for a good used one for the transplant.

I really wanted to go to COTA this year, but was hoping that they would have an open track day on Thursday prior to the event. Guess the cost is prohibitive. I'll get there one of these days. Next PCA races for me are Road Atlanta and NOLA.
__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)
Lemming is offline   Reply With Quote
Old 03-16-2021, 01:22 PM   #54
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
If anyone is looking for parts from a 2001 S, let me know. Keeping engine, trans, head/tail lights, and body panels. Interior and other parts will be sold. If you need something let me know.
__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)
Lemming is offline   Reply With Quote
Old 03-29-2021, 07:03 AM   #55
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
Question, I plan on using the 986 S 6 speed trans ('01) in my 986 base ('98). Which half shafts work with this configuration, the S or base shafts? Thanks.


Oops, just read this 6 Speed Conversion.

So, has anyone done this and have the parts list? I have the intact S that I can pull parts from or am I just better off using the 5 speed that's already in my base car?
__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)

Last edited by Lemming; 03-29-2021 at 07:28 AM.
Lemming is offline   Reply With Quote
Old 03-30-2021, 04:37 AM   #56
Registered User
 
Join Date: Jul 2013
Location: Bastrop, Tx
Posts: 2,643
Quote:
Originally Posted by Lemming View Post
I really wanted to go to COTA this year, but was hoping that they would have an open track day on Thursday prior to the event. Guess the cost is prohibitive. I'll get there one of these days. Next PCA races for me are Road Atlanta and NOLA.
It was the lowest turnout I've ever seen at COTA. Only 18 in spb! Usually it's double that. Have you heard there's a new racing series for SPB at ECR and MSR in Cresson? It's bringing some excitement back to the Texas SPB racing scene. I got to finally go see ECR in person and ride along with a friend in his Spec 996. What a wonderful track!
__________________
Woody
itsnotanova is offline   Reply With Quote
Old 04-19-2022, 06:47 AM   #57
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
So the project is finally back and making progress. The 3.2L engine is in, but I am still working on getting the air intake set up (waiting on a part that should arrive today). I ended up using an airbox from a 987 Cayman S, and 996 mechanical TB. In order to make the airbox fit, I had to do a bit of sheet metal work (think saw and hammer), but it's in an area you will never see unless you pull the engine.

New clutch and pressure plate are installed.

All the parts for the 6-speed transmission install are on hand.

Still trying to decide on the exhaust. I've got both the 986 and 986S exhaust, but am thinking of building a less restrictive setup as I did with my SPB.

Picked up a set of bilsteins PSS9s for cheap from a racer moving to MCSs and also replaced all wheel bearings while I was in there. New LCAs as well.

Hoping to have it off the lift by the end of this weekend, then will get a friend to flash the ECU to a 996. Can't wait to start driving it again.



__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)
Lemming is offline   Reply With Quote
Old 11-07-2022, 02:55 PM   #58
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
Getting the car flashed was a PITA, all those that said they could do it, couldn't. I finally took the ECU with me to ECR last month and John G did it in a flash (so to speak). Car is running and it is strong. Headed to the dyno on Wed, will post results when I get them.
__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)
Lemming is offline   Reply With Quote
Old 12-15-2022, 10:44 AM   #59
Registered User
 
Lemming's Avatar
 
Join Date: Apr 2016
Location: B'ham, AL
Posts: 265
Two dynos are shown below.

Blue line was with 2.5 headers and midpipes (with cats) and 3.2L muffler.
Red line was with 3.2 catless headers, catless midpipe, and 3.2 muffler.

Max HP increase was just less than 10 HP and 12 lb ft of TQ, but usable power throughout the range is much better, at times 20 lb ft of torque as well as HP.

Still a bit fat on the air/fuel.

__________________
Tim
1998 986 (daily driver Frankencar)
1999 986 (SPB)
2001 986 S (parting)
2015 981 (sold)
Lemming is offline   Reply With Quote
Old 12-16-2022, 11:41 AM   #60
Registered User
 
Join Date: Oct 2020
Location: KY
Posts: 1,216
Nicely done!

I'm curious, do you have pics of the specific headers you tested? I'm curious to know if there's much of a difference in piping diameter or if the only real difference is the lack of cats.

Also, did you make any intake adjustments between the test? Maybe I missed it, but what intake setup did you use?

Also, for your AFRs, it looks like you're running around 11ish? That's standard programming for our ECU to run at WOT (or at least that's what my 996 tune does). It will be quite tricky to tune that out without altering the maps.

Sent from my SM-N976V using Tapatalk

__________________
2000 Box Base, Renegade Stage 1 performance mods complete, more to come
When the owners manual says that the laws of physics can't be broken by this car, I took it as a challenge...
ike84 is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page