Quote:
|
We all are passionate about our vehicles and hate to see them blemished particularly due to other's errors. That said, we all can stand from catching a break here and there and you'll never feel bad helping out someone in need. Sounds like "Rhonda" could really use the break you are giving her and hopefully she will pay it forward to someone else.
A hassle for sure but the juice ain't worth the squeeze. In this instance you'll feel better helping her out rather than making her pay. Good decision and an even better lesson for us all. :) |
If Rhonda fessed up, under the circumstances I think I would tell her Merry Christmas, make a joke about it, and just take care of it myself.
But I don't like being lied to or taken advantage of, I certainly don't want to set a precedent of just rolling over when this does happen, and I don't like reinforcing bad or antisocial behavior in others, so if I thought she was lying I might just press the issue even if it would ultimately cost me more in this particular case. Maybe I am becoming a grumpy old man. |
Take bumper off heat it with blow dryer and pop it out best you can bring it to get resprayed no more than 400 dollars new or used taillight .....done. I have 2 stock 02 taillights maybe I could pass on. I think yours may be aftermarket. I just put my bumper back on yesterday for the second time only reason I know. Also painted bumperettes while i was there
|
Have yours sanded and painted you will love it i am sure
|
Sorry to hear about your misfortune. To me, that looks like someone backed into your bumper with a trailer hitch. The dent looks too focused and small to be the middle of a bumper.
|
Thanks all...
I really don't have any doubt at this point that it was that Suburban. Given the layout of the parking lot and what was parked there that day, it wouldn't make much sense for any of the other vehicles to have done it. I'd park back to back with an early '90s Suburban to prove the point, but I've obsessed enough about this already. Here's a pic with a slightly downward view of the Suburban bumper and how it lines up including the scuff on the bumperette. http://986forum.com/forums/uploads02...1575727660.jpg Considering the mass of a Suburban slowly backing into the soft plastic bumper of a 986, I think she may not have felt it happen. ...I hope that she didn't. I have another matching tail light already. I can do the paint work myself. I plan to get a gallon of Arctic Silver, so that along with the bumper, I'll have enough paint to fix some spots on THAT as well - hood and a rear fender. :cheers: |
I replaced the tail light and spent a few minutes with a heat gun to pop the dent out without taking the bumper off. Prepping and repainting the bumper is going to take a lot of time. For now, I have a temporary solution to cover the paint damage:
http://986forum.com/forums/uploads02...1576291276.jpg |
I have too many projects and too many cars. I plan to sell THIS and THAT. ...but I want to fix up a few things before I sell them so, MORE projects. THIS only has a few issues that I plan to address and one of them was the rear bumper damage. I didn't want to sell it with the stickers covering the bad paint.
I found a spray can of Arctic Silver Metallic 92U paint among my boxes of stuff that came with cars. It came from one of the several vendors... scratch-something or color chip. When tested, it matched color well and sprayed smooth. "Awesome." I thought, "I can just spray the bad corner and blend it in with the rest of the bumper." I did a few hours of prime and fill to get it perfectly smooth and feathered. I sprayed the color, the clearcoat and it looked decent, but was a little dark at one edge when it all dried. No big deal I thought, there was just enough paint left to go back over that edge. I did a light wet-sand then went to wipe it with a cloth that had some industrial grade alcohol. The alcohol turned the paint gummy and the cloth pulled streaks across the paint. Ruined and not much paint left. Time to pull the bumper off and do it right. http://986forum.com/forums/uploads02...1591330777.jpg THAT needs some paint work too. It had a few rough spots when I bought it and they have gotten worse over time. I decided to get a full gallon of paint, a Nason single stage acrylic, and use it for both cars. About $200 at O'Reilly Auto Parts for the paint and hardener with Military (retired) discount. I already have some basic supplies, a 60 gallon air compressor, and Devilbiss spray gun set. All I need is some skill and more patience. Re-sanded. Re-primed. http://986forum.com/forums/uploads02...1591330859.jpg Re-painted. It looks pretty good from about two feet. The paint was still soft and a little tacky last I checked. Hopefully I can just put it on the car and leave it alone, but part of me wants to do a very fine sand and polish on it still - which will probably ruin it again. http://986forum.com/forums/uploads02...1591330915.jpg |
Looks spotless to me. You really made that with a spray can? Great job, don`t ruin it! :cheers:
|
I'm with itsnotanova. No way that bumper did that damage. Too sharp of a crease for that bumper to do it. Nonetheless, I commend you for cutting Rhonda a break while you were so certain she did it. I hope you get all you ask when you sell it. :cheers:
|
Quote:
Quote:
I set it back on the car today to see how well the color match was. Tomorrow, I'll finish mounting it. I'm really happy with the color and how well the paint laid smooth. I'm going to have to polish the original paint now. https://live.staticflickr.com/65535/...2915fc40_c.jpg |
Quote:
Maybe she did it, but there's no certainty there, IMHO. To me, the dent on your bumper doesn't match up with the shape of her bumper. Also, the horizontal part (under the license plate) of her bumper is the lowest point on her bumper, yet the marks on your bumperette are higher than the bottom of the crease on your bumper cover. More importantly, the bumperettes stick out farther than the crease on the bumper cover, yet the aforementioned horizontal part of her bumper is either on the same plane or sticks out farther than the rest of her bumper. So, if that hit your bumperette, as you indicated in your drawings, the horizontal bend in her bumper could not have hit your bumper cover to cause that vertical crease damage. Your damage was more likely caused by something like this: https://realtruck.com/p/ami-swing-step-grille-guard/asm-19285-505-asm-19285k/?kpid=go_cmp-9884836042_adg-100686975739_ad-431585076121_pla-313046400386_dev-c_ext-_prd-ASM-19285-505%26ASM-19285K_sig-EAIaIQobChMIvIjNwJnu6QIVTeG1Ch1tWAj1EAYYCSABEgK_Nf D_BwE&utm_medium=cpc&utm_source=google&utm_campaig n=Grille%20Guards%20%26%20Bull%20Bars%20-%20Smart%20Shopping&utm_term=&gclid=EAIaIQobChMIvI jNwJnu6QIVTeG1Ch1tWAj1EAYYCSABEgK_NfD_BwE I just wouldn't want you to go on resenting this person if she didn't do it. Either way, huge respect for letting it go. I hope you get all you ask for it when you sell. :cheers: |
Quote:
|
Quote:
https://www.polyvance.com/video/bumper-repair/fiberflex-bumper-repair-3 On a bumper cover, I prefer doing a 'plastic weld' type of fill to using a body filler such as Bondo. I did some plastic welding with a soldering iron before I bought it, but really like the temperature control and materials included with this kit. Repair a couple plastic panels and it has paid for itself: http://986forum.com/forums/uploads02...1591983867.jpg |
Next up for body work is THAT. The paint on the rear was obviously a re-spray that had been done at some time in the past. About a year ago some of the clear coat started to peel from the repair and there were some fine cracks in the paint. Yesterday, I started sanding off the bad clear and Dremmeling out the cracks. The cracks were almost 1/4" through body filler before I got down to metal. That's not good. I had guessed that it was only a little over a millimeter thick.
http://986forum.com/forums/uploads02/lrq1591984503.jpg I had planned to just use filler after digging out the cracks. Now I think I should try something different. I happen to already have a left rear quarter panel cut from a car that I scrapped a few years ago. I have never done a body panel welding-type repair, but I think that it will be the best way to proceed. http://986forum.com/forums/uploads02...1591984721.jpg ...and to think I started 'cleaning' these two cars up to sell because I have too many other projects that I want to get to. |
Quote:
|
|
So far it seems to be working. Bonus: No blood lost, I still have all my fingers, used a mask for the cuts and grinding, and I can still see with both eyes.
Prepping the patch panel. https://live.staticflickr.com/65535/...1b37dc90_c.jpg Cutting the old panel off. https://live.staticflickr.com/65535/...a71da094_c.jpg Fitting the patch. https://live.staticflickr.com/65535/...91b6cd58_c.jpg It's hot and I'm tired. I'm going to hold of on the final fitting and welding until tomorrow. :cheers: |
Yeah, it`s more labourous, but this is the right way to do this. The patch is fitting nicely! :cheers:
|
All times are GMT -8. The time now is 11:46 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website