Quote:
Originally Posted by RichRobby
Nice work. Car, as always looks great.
I pretty much copied you with the projector lights and DRL's. Touch wood no problem with the projectors yet but it will happen no doubt but I don't do many miles, especially at night.
Have a constant problem with the DRL's fitting. Used hot melt glue to stick and align them on the underside of vent fins but keeps coming detached. Haven't found a way of getting them right using another method and don't want to drill the fins. They don't fall of as there is a tiny cable tie holding them as well but it doesn't help for a firm well aligned fix.
Sent from my ONEPLUS A3003 using Tapatalk
|
Thank you
On a facelift bumper, put them on top of the top fin so that it squeezes itself into place. Before doing it, run a small line of Tiger Seal on top of the fin towards the back so that when you slide it in, it glues itself. Tiger Seal comes off if heated too so it's all fine.
Threaded Mode
