Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-16-2004, 12:30 AM   #1
Forum Member
 
LilleyT's Avatar
 
Join Date: Mar 2004
Location: UK - Great Yarmouth, Norfolk.
Posts: 8
Question Wax on or wax off ?

Hi all,

The Boxster drivers manual mentions that due to the Hi-Quality paint finish, waxing is only required infrequently.

My previous car (MR2 Roadster) was treat to serious Autoglym loving on a very regular basis, but I do not really want to go against the manual for the hell of it and potentially reduce the quality of the finish ?

So what do you think, Wax on or Wax off ?

LilleyT is offline   Reply With Quote
Old 04-16-2004, 07:01 AM   #2
Registered User
 
donv's Avatar
 
Join Date: May 2002
Location: NW of Boston, MA
Posts: 697
Getting my hair cut is only required infrequently, but then I don't look so good... difference is what is required vs. desired.

Wax as much as makes you happy, so long as there's no abrasives involved...
__________________
2001 Lapis/Black/Black, PSM, Rear Speaker Kit, Optima...
donv is offline   Reply With Quote
Old 04-16-2004, 10:34 AM   #3
Registered User
 
jfmillr's Avatar
 
Join Date: Mar 2003
Location: Alexandria, VA (PCA Potomac Region)
Posts: 384
i would wax on....
I am a big fan now of the Zainos products as mentioned in some posts around here. I think you will be very happy with the results they provide
__________________
www.09860.com
jfmillr is offline   Reply With Quote
Old 04-19-2004, 12:27 AM   #4
Forum Member
 
LilleyT's Avatar
 
Join Date: Mar 2004
Location: UK - Great Yarmouth, Norfolk.
Posts: 8
Thanks jmfilly, i'll look into Zainos ... although as I said I've been using Autoglym for years but am always prepared to try something else, certainly if based on a recomendation.

I have always been concerned about the degree to which some polishes cut, previous cars have been black and any of the cutting polishes ended up producing polishing 'rings'. My Boxster is AS and so shouldn't suffer (or look to obvious) if this happens, but I'm very keen to minimise any adverse effects.

Thanks.
LilleyT is offline   Reply With Quote
Old 04-19-2004, 06:02 AM   #5
Registered User
 
donv's Avatar
 
Join Date: May 2002
Location: NW of Boston, MA
Posts: 697
I'm a Zaino user as well; there is no abrasive in their clear coat finish product. In my experience, it lasts much longer than a standard wax product - but others agree as well.
__________________
2001 Lapis/Black/Black, PSM, Rear Speaker Kit, Optima...
donv is offline   Reply With Quote
Old 04-19-2004, 04:36 PM   #6
Registered User
 
Join Date: May 2002
Location: Florida
Posts: 284
I have used Zaino and Zymol (carbon). Both produce great results The key is, add something, hopefully of high quality. follow the manufacturers' application instructions and enjoy the shine. Plan on some time to apply.
ehljags is offline   Reply With Quote
Old 04-19-2004, 06:23 PM   #7
Registered User
 
Join Date: Nov 2003
Location: Illinois
Posts: 3,033
I just ran out of my 3 bucks a can kits carnuba wax. Time to get some good stuff to see if it is actually any better. Went to autozone today and I was looking for zainos, but no success. Where can one find this wax? Oh, and how much? I did see blueish Zymol in a plastic bottle but nothing else. I thought zymol was a multi step wax proccess?
Adam is offline   Reply With Quote
Old 04-20-2004, 09:24 AM   #8
Registered User
 
donv's Avatar
 
Join Date: May 2002
Location: NW of Boston, MA
Posts: 697
http://www.zainostore.com - "not sold in stores"...

__________________
2001 Lapis/Black/Black, PSM, Rear Speaker Kit, Optima...
donv is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page