Brake and ABS light issue

[harnishclan]

Just finished a literal ground up spec Boxster build. Stripped to tub and welded, painted, installed, and upgraded for the past 15 months. Car is done and track ready save for a single issue. All three brake lights stay on and dashboard ABS light will not reset. Used durametric, no ABS codes but also cannot cycle the ABS light. Any ideas?

[harnishclan]

Thanks for all the advice! There were so many responses that I didn’t know where to start, but decided to go through the circuit and see what I found.

Turns out that when I adjusted the brake pedal height to level with throttle for heel/toe that it was now too far away from the max extension of the switch to deactivate. Adjusted the height a bit and added a spacer to brake pedal arm, problem solved.

[Starter986]

American ingenuity in action.

Next time... the search bar.

You're welcome.

[harnishclan]

Originally Posted by Starter986

American ingenuity in action.

Next time... the search bar.

You're welcome.

Good luck finding it there. I tried that first, you are welcome.