Schnell Short Shift kit problems! You get what you pay for!

[blinkwatt]

@ Ohio & Boggtown,

How does the eBay shift feel comparede to stock? Is it easy to use? Does it go into gear easily? Does it make it a pain to go into first? Is it constructed well?

[ohioboxster]

@ Blinkwatt, I cant believe there is any difference between the 60 dollar one and the 230 dollar one. It shifts great and looks to be a quality piece of machined aluminum. Get the cheap one and if you really wanted to you could tell everyone it was a B&M, lol.

[blinkwatt]

Originally Posted by ohioboxster

@ Blinkwatt, I cant believe there is any difference between the 60 dollar one and the 230 dollar one. It shifts great and looks to be a quality piece of machined aluminum. Get the cheap one and if you really wanted to you could tell everyone it was a B&M, lol.

Have you driven the B & M? Does it make it hard to go into certain gears? If I didn't like it would it be easy to go back to stock?

[Adam]

Originally Posted by blinkwatt

Have you driven the B & M? Does it make it hard to go into certain gears? If I didn't like it would it be easy to go back to stock?

Blink I listened to everyone out there and bought a B&M about a year ago. Let me tell you, if you like smooth easy shifts I would skip on any SSK for your boxster. It was really, really hard to get into first and reverse. The rest of the gears engaged a bit easier but still way notchier and with much more effort than stock. Plus, there did seem to be a clunk of some sort like someone else mentioned when shifting into 1st, 3rd and 5th. I went back to stock after only a day or two after redoing the install to insure it was done right. It was. You can go back to stock, but the catch is you can't return the SSK and get your money back because during the install proccess you MUST break the stock bushings and use the ones supplied in the kit. Now I have a stock shifter with B&M bushings. Those were two very expenisve aluminum bushings let me tell you. My advice is to try before you buy on this product. I think the factory shifter is much better despite the longer throws.

[Boxtaboy]

I agree. I've driven a couple Boxsters with the B&M and the Ebay clone shifters, and don't like the feel. Yeah, the shift action is shorter, but the smooth, buttery feel is no more, and the gearbox ends up being more notchy...especially in cold weather. Reminded me of the shift action of an 86 Mustang GT one of my high school friend's used to have.

I suggest you drive one with a B&M before switching.

Mines not hard to get into first or reverse at all. Its awesome. Same with you ohio? Yes, very quality piece of work, my stick was installed wrong as another member who bought it told me, so all I did was undo the bolt, turn it around, and re do the bolt and its perfectly straight up and down.

[Adam]

All I'm saying is there is a big increase of shift effort when I put the B&M shifter in. I had it checked by two people...one being a certified mechanic and they also agreed that it felt like crap and verified the install. I dunno...maybe my car is an anomoly (sp?)