Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 11-14-2006, 07:05 PM   #1
Registered User
 
Join Date: Oct 2006
Location: san francisco
Posts: 12
++How much does it cost to Swap3.6++

how mush does it cost
and when we talk bout 3.6 is that come from 996?

i did swap subaru engine?(but just swap same one)
can i do it my self?

and where u guys recommend if i'm in San Francisco

thanks a lot
GooDiez is offline   Reply With Quote
Old 11-14-2006, 08:58 PM   #2
Registered User
 
Join Date: Nov 2003
Location: Illinois
Posts: 3,033
That depends on sooo many variables I can only give you a rough estimate without more info. Are you wanting to get a used 3.6L 996 engine from a salvaged car? That will probably run anywhere from 3k-7k depending on mileage and condition. A new or reconditioned 3.6L will run you approx 10-15K. I'm assuming you don't have the technical know how to perform the swap so you have to consider who will do it. If RUF or comparable company does the job expect an additional 10k or so in parts and labor. If the local Indy shop does the job maybe half that and cross your fingers. Bottom line is you are probably looking at around 10k dollars on the extreme low end and about 25K at the high end. If you don't have Bosch motronic 7.8 which was on all 2003+ boxsters you are looking at considerably more money...in which case a 3.4L swap would be the better choice.
__________________
'03 3.2L GuardsRed/Blk/Blk---6Spd
Options: Litronics, 18" Carrera lights, Bose sound, Painted to match roll bars.
http://i100.photobucket.com/albums/m...Mautocross.jpg
Adam is offline   Reply With Quote
Old 11-15-2006, 05:56 PM   #3
Registered User
 
Join Date: Oct 2006
Location: san francisco
Posts: 12
Quote:
Originally Posted by Adam
That depends on sooo many variables I can only give you a rough estimate without more info. Are you wanting to get a used 3.6L 996 engine from a salvaged car? That will probably run anywhere from 3k-7k depending on mileage and condition. A new or reconditioned 3.6L will run you approx 10-15K. I'm assuming you don't have the technical know how to perform the swap so you have to consider who will do it. If RUF or comparable company does the job expect an additional 10k or so in parts and labor. If the local Indy shop does the job maybe half that and cross your fingers. Bottom line is you are probably looking at around 10k dollars on the extreme low end and about 25K at the high end. If you don't have Bosch motronic 7.8 which was on all 2003+ boxsters you are looking at considerably more money...in which case a 3.4L swap would be the better choice.

where is 3.4 come from? 993?

sorry that i don't know too much bout porsche i'm really new for this.

and i don't think that set turbo on 3.2 boxster gonna better , isn't it?

thanks
GooDiez is offline   Reply With Quote
Old 11-15-2006, 06:06 PM   #4
boggtown
Guest
 
Posts: n/a
UHG. What year is your car, what are your expected HP results. Do you just want 300 horses or a 996 engine, because Porschedoc said a supercharged 2.5 is more powerful than a 3.4, and its a lot cheaper. Or are you wanting a 3.4 or 3.6 and then superchargeing that, what are you wanting basically?
  Reply With Quote
Old 11-15-2006, 06:13 PM   #5
Porscheectomy
 
Join Date: Mar 2006
Location: Seattle Area
Posts: 3,011
About a hundred dollars.
blue2000s is offline   Reply With Quote
Old 11-15-2006, 07:27 PM   #6
Registered User
 
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
Ha!
RandallNeighbour is offline   Reply With Quote
Old 11-16-2006, 08:21 AM   #7
Registered User
 
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
Send a message via MSN to CJ_Boxster
Quote:
Originally Posted by blue2000s
About a hundred dollars.
Dont forget tax... thats another $8.25.
and Shipping, About $3.49 plus the $1.50 for the Flatrate envelope to package the engine.
__________________
--Proud Boxster Owner/Tech,

Carlos J Cazares

FastForward Performance
http://i10.photobucket.com/albums/a1...er/newsig1.jpg
CJ_Boxster is offline   Reply With Quote
Old 11-15-2006, 11:00 PM   #8
Registered User
 
Join Date: Oct 2006
Location: san francisco
Posts: 12
Quote:
Originally Posted by boggtown
UHG. What year is your car, what are your expected HP results. Do you just want 300 horses or a 996 engine, because Porschedoc said a supercharged 2.5 is more powerful than a 3.4, and its a lot cheaper. Or are you wanting a 3.4 or 3.6 and then superchargeing that, what are you wanting basically?
basicly i need horse power on boxster

but what i heard is swap engine is better and easier to get more power

and i also think that it's gonna destroy engine with supercharge or turbo?

if u have more infomation please


thanks a lot
GooDiez is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page