10-03-2021, 11:35 AM
|
#61
|
|
Registered User
Join Date: Aug 2016
Posts: 171
|
Well I got the crank case apart. The crank looks usable to me, nice and shiny on the journals no scoring. I’m going to take it to get magna flux and inspected so will let the experts tell me for sure if it’s usable or not.
https://adobe.ly/3Dc0mdI
I found out I can’t measure and test fit the crank case and the crank until I have the ARP crankcase bolts I’m using in hand. The ARP bolts I need are back ordered for a while, and I’m going to pick them up when I pick up my block in November or December, so it’ll probably be not that many updates for a while.
Silber
__________________
2002 Boxster S - Silver/Boxster Red
Coilovers - LSD - CAI - High Flow exh. - F&R Adjustable Sways
LN 3.2 to 3.8 - parts acquired, pending assembly and tuning
|
|
|
|
10-09-2021, 06:47 AM
|
#62
|
|
Registered User
Join Date: Aug 2016
Posts: 171
|
I was recently corresponding with Len Hoffman owner of Hoffman Automotive Machine. Http://www.hamheads.com about valve springs, and the subject of my 3.8 rebuild with bone stock 3.2 heads came up, and he said the following: (reposting with permission)
Quote:
|
The 3.2 heads will definitely work well with the 3.8 upgrade. There's no replacement for displacement.
|
So, someone should probably tell one of the most knowledgeable experts on Porsche heads in the world that his knowledge of Porsche heads is “Rudimentary at best.”
Regards,
Silber
__________________
2002 Boxster S - Silver/Boxster Red
Coilovers - LSD - CAI - High Flow exh. - F&R Adjustable Sways
LN 3.2 to 3.8 - parts acquired, pending assembly and tuning
Last edited by Silber; 10-09-2021 at 06:53 AM.
|
|
|
|
|
10-09-2021, 07:35 AM
|
#63
|
|
Registered User
Join Date: Mar 2017
Location: Arizona
Posts: 185
|
Quote:
Originally Posted by Silber
I was recently corresponding with Len Hoffman owner of Hoffman Automotive Machine. Http://www.hamheads.com about valve springs, and the subject of my 3.8 rebuild with bone stock 3.2 heads came up, and he said the following: (reposting with permission)
So, someone should probably tell one of the most knowledgeable experts on Porsche heads in the world that his knowledge of Porsche heads is “Rudimentary at best.”
Regards,
Silber |
I agree he was extremely helpful on my heads and did a great job.
|
|
|
|
|
10-09-2021, 08:01 AM
|
#64
|
|
Registered User
Join Date: Aug 2016
Posts: 171
|
Quote:
Originally Posted by azlvr
I agree he was extremely helpful on my heads and did a great job.
|
He was very very helpful, and I have not even bought anything from him yet! High marks from me all around!
He did mention they have an oversized valve and port option for the 3.2 heads that offers double digit flow improvements for a very reasonable price. If my budget wasn’t already at the limit, I would totally send my heads in for that.
Silber
__________________
2002 Boxster S - Silver/Boxster Red
Coilovers - LSD - CAI - High Flow exh. - F&R Adjustable Sways
LN 3.2 to 3.8 - parts acquired, pending assembly and tuning
|
|
|
|
|
10-10-2021, 06:41 AM
|
#65
|
|
Registered User
Join Date: Mar 2017
Location: Arizona
Posts: 185
|
Please keep us posted with your journey, i'm planning the same journey but my car still runs great at almost 160k so not ready yet.
|
|
|
|
|
10-10-2021, 09:44 AM
|
#66
|
|
Registered User
Join Date: Aug 2016
Posts: 171
|
Quote:
Originally Posted by azlvr
Please keep us posted with your journey, i'm planning the same journey but my car still runs great at almost 160k so not ready yet.
|
Planning to update this thread through at least engine build, installation and tuning.
May take me a while to get it all done, so updates may not be terribly frequent, but I’ll make sure it gets captured as it happens.
Regards,
Silber
__________________
2002 Boxster S - Silver/Boxster Red
Coilovers - LSD - CAI - High Flow exh. - F&R Adjustable Sways
LN 3.2 to 3.8 - parts acquired, pending assembly and tuning
|
|
|
|
|
01-18-2022, 05:19 PM
|
#67
|
|
Registered User
Join Date: Aug 2016
Posts: 171
|
Picked up the finished block from LN engineering yesterday!
__________________
2002 Boxster S - Silver/Boxster Red
Coilovers - LSD - CAI - High Flow exh. - F&R Adjustable Sways
LN 3.2 to 3.8 - parts acquired, pending assembly and tuning
|
|
|
|
|
01-20-2022, 04:46 AM
|
#68
|
|
Registered User
Join Date: Mar 2017
Location: Arizona
Posts: 185
|
Quote:
Originally Posted by Silber
Picked up the finished block from LN engineering yesterday!
|
It seems like that took longer than normal. Was it a problem at LN or plating?
|
|
|
|
|
01-20-2022, 08:34 AM
|
#69
|
|
Registered User
Join Date: Aug 2016
Posts: 171
|
It was ready late December, but I missed the voice mail telling me so. Basically, delay is on me.
They had sent it to plating within a week of me dropping it off, so most of the time was spent there.
Ski season is in full swing, and work is crazy, probably won’t work on this project again till March or April.
Silber
__________________
2002 Boxster S - Silver/Boxster Red
Coilovers - LSD - CAI - High Flow exh. - F&R Adjustable Sways
LN 3.2 to 3.8 - parts acquired, pending assembly and tuning
|
|
|
|
|
05-04-2022, 04:18 PM
|
#70
|
|
Registered User
Join Date: Aug 2016
Posts: 171
|
Just checking in…
Life has interfered with my fun Boxster project, I’m hoping to get started on it again in the next month or two. I think I pretty much have all the parts I need it should be just a matter of labor at this point.
Silber
__________________
2002 Boxster S - Silver/Boxster Red
Coilovers - LSD - CAI - High Flow exh. - F&R Adjustable Sways
LN 3.2 to 3.8 - parts acquired, pending assembly and tuning
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 11:40 PM.
| |
Linear Mode
