986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Performance and Technical Chat (http://986forum.com/forums/performance-technical-chat/)
-   -   Oil drain pan and filter wrench (http://986forum.com/forums/performance-technical-chat/78931-oil-drain-pan-filter-wrench.html)

Starter986 11-01-2020 04:20 AM

Quote:

Originally Posted by JayG (Post 626149)
same one I have, works great!

Works great if you remember to open the vent cap.

That only happened once. Once. ;)

JayG 11-01-2020 05:16 AM

Quote:

Originally Posted by Starter986 (Post 626232)
Works great if you remember to open the vent cap.

That only happened once. Once. ;)

YES!

Also, IIRC, I drilled some extra holes under the cap where the oil drains into the container

jaykay 11-11-2020 04:53 PM

1 Attachment(s)
I tried both of these....an eight inch diameter is doable if you are careful. The advantage here is the oil is all packed up and ready to go right after you drain it.

Yes I was able to do it on ramps as long as I slid under on cardboard like an animal :eek. I did get a tie down to the eye and nose....

jaykay 11-11-2020 04:55 PM

.....and this


All times are GMT -8. The time now is 05:27 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website