Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-08-2018, 11:11 AM   #1
Registered User
 
Join Date: Jun 2017
Location: Southeast
Posts: 73
Quote:
Originally Posted by itsnotanova View Post
That also might explain the lean running condition. More air in and out but no increase in fuel.
OEM 986/996 injectors are only 230cc/min if I'm not mistaken which IMO are woefully undersized and at the practical limit. At 100% duty cycle and a fuel pressure of 43.5psi 6 230cc injectors are theoretically only good for around 290bhp.

I'm not surprised to hear about modded 3.4 lean issues at all. You should be completely out of injector given the math.

**edit**

I just found that fuel pressure in a 996 is actually 55psi, so that should give a little more headroom, like 6 more bhp.

I'm surprised Porsche put such a small injector in these cars. I've always been under the impression you really don't want to run an injector more than 80% IDC just so you have some additional margin. That would mean you really want an injector around the 290cc mark. That would run a motor comfortably at 300bhp and give you room to grow up to around 370bhp.

Last edited by deathsled986; 04-08-2018 at 11:22 AM.
deathsled986 is offline   Reply With Quote
Old 04-10-2018, 02:40 PM   #2
Registered User
 
jaykay's Avatar
 
Join Date: Sep 2009
Location: toronto
Posts: 2,668
What do folks with 3.2s modified for 3.6 or 3.8 do for injectors....don't ever hear about capacity issues
__________________
986 00S
jaykay is offline   Reply With Quote
Old 04-10-2018, 02:44 PM   #3
Registered User
 
seningen's Avatar
 
Join Date: Jul 2008
Location: austin
Posts: 825
Quote:
Originally Posted by deathsled986 View Post
OEM 986/996 injectors are only 230cc/min if I'm not mistaken which IMO are woefully undersized and at the practical limit. At 100% duty cycle and a fuel pressure of 43.5psi 6 230cc injectors are theoretically only good for around 290bhp.

I'm not surprised to hear about modded 3.4 lean issues at all. You should be completely out of injector given the math.

**edit**

I just found that fuel pressure in a 996 is actually 55psi, so that should give a little more headroom, like 6 more bhp.

I'm surprised Porsche put such a small injector in these cars. I've always been under the impression you really don't want to run an injector more than 80% IDC just so you have some additional margin. That would mean you really want an injector around the 290cc mark. That would run a motor comfortably at 300bhp and give you room to grow up to around 370bhp.
So the real question then is if Woody's boxster is setup up for 55psi or not.

Mike
__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
seningen is online now   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page