Supercharger Installation!

[ohioboxster]

This is where I would like to install the boost gauge but I started to think long term. If I sell the car with no blower then I have a hole in the dash, you never know.


This is where I tee'd into the vacuum line, zip tied in a few spots to keep it from moving around.



I ran the vacuum line under the center console and zip tied it to existing wires.


This is where I ended up putting it.



Gauge functioning at idle, still need to wire light had to break for some chow.

[ohioboxster]

Although not exciting it was necessary. I cleaned all the machined surfaces that mate and the duct work. Found a few spiders living in my pipes.


Getting the blower cleaned up.


This is the oil for the blower, I ended up using probably one and a half bottles.


This is what the spark plug tubes look like that Im going to replace along with o-rings, if your interested.


I changed my cabin filter, look how dirty.