Supercharger Installation!

[ohioboxster]

This is the pic after I taped into the harness, soldered the wires and rewraped.


Now its all wired and reinstalled, looks pretty good huh?


This is where I ran the wires and vacuum line into the engine bay. Dont worry nobody will ever see the holes.


These are the additional fuel injector wires that go to the box in the trunk. I zip tied the out of the way after soldering the connections. The box is all wired ready to go.


This is the fuel regulator that I need to tee into and run a vacuum line into the trunk to the Digi box. As boost increases the box fires the 7th injector.


There, I teed into the vacuum right here.


I still need to tee into the line again for my boost gauge. I will decide where after the gauge gets here and I figure out where to mount it. This final picture is the box behind the carpet. You will never know its there.

[ohioboxster]

Sorry if this appears to be going backwards. I wasnt allowed to post all the pics in one post. Im not real sure how to correct that. I think getting the box all wired will save alot of time toward the end of the install. This is actually the last step in the install manual but I realized when I posted the price list I failed to order the O-rings for the spark plug tubes. I ordered the tubes as well, If Im going to be that under there and have the plugs out I might as well change them too. I took the car for a test run and I didnt freak the computer out. I was a little worried but it ran great. Next I will take pics of the boost gauge install. I would welcome suggestion on where to install it.