986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Performance and Technical Chat (http://986forum.com/forums/performance-technical-chat/)
-   -   Continental TR7412UB-OR Stereo Installation and Review (http://986forum.com/forums/performance-technical-chat/66343-continental-tr7412ub-stereo-installation-review.html)

dulmer 04-28-2017 02:17 PM

Continental TR7412UB-OR Stereo Installation and Review
 
So I finally got my new Continental stereo installed. By using the custom harness from Bergvill F/X, it couldn't have been easier:

1. Pull out old stereo
2. Disconnect harness from old unit
3. Remove old installation frame and install new one that comes with the stereo.
4. Connect Bergvill harness to factory harness
5. Plug Bergvill harness into Continental unit
6. Push Continental unit into frame until it locks
7. Snap on trim piece
8. Enjoy the look and sound!

So I just got it into the car today, but initial impressions are good. Far more bass than factory unit, and the tone just sounds fuller. Bluetooth pairs easily, and calls seem clear. On the negative side, the USB looks a little sloppy with the cover hanging open when you have a jump drive plugged into it, but overall I'm very happy so far. Attached are some photos and a link to a quick video (for what it's worth).

https://youtu.be/7UVHHmKJfns

https://uploads.tapatalk-cdn.com/201...1a0c957692.jpghttps://uploads.tapatalk-cdn.com/201...529665b405.jpghttps://uploads.tapatalk-cdn.com/201...69e4a1737e.jpg




Sent from my iPad using Tapatalk

BoxsterSteve 04-28-2017 05:23 PM

Nice.
Keep,us posted.
I've bee eyeing that unit myself, as it looks as if it were a factory piece but with added modern features without looking like an aftermarket part.
Plays MP3 discs too, yes?
Care to share what it cost?

dulmer 04-28-2017 05:30 PM

Quote:

Originally Posted by BoxsterSteve (Post 535411)
Nice.

Keep,us posted.

I've bee eyeing that unit myself, as it looks as if it were a factory piece but with added modern features without looking like an aftermarket part.

Plays MP3 discs too, yes?

Care to share what it cost?



Hey Steve, this particular unit doesn't have a CD player, but there is a version with one. I think I paid about $180 CDN for mine. Take a look at the Bergvill F/X website.


Sent from my iPad using Tapatalk

alex.rhodes 04-29-2017 03:35 AM

Dulmer,

I like the look of it installed. I have an aftermarket pioneer that does not match the interior. After looking at it installed in yours, I think I may replace mine eventually.

Alex

Jamesp 04-29-2017 06:31 AM

That looks fabulous. Wow, so much better than the typical sparkly / cheesy aftermarket single DIN stereo that sticks out like a sore thumb. Nice choice.

dulmer 04-29-2017 10:21 AM

Quote:

Originally Posted by Jamesp (Post 535445)
That looks fabulous. Wow, so much better than the typical sparkly / cheesy aftermarket single DIN stereo that sticks out like a sore thumb. Nice choice.



Thanks! I wish it didn't have the chrome ring on the volume knob, but overall pleased with the appearance and sound quality.


Sent from my iPad using Tapatalk

roadkingedout 05-02-2017 03:00 PM

Can you send pandora to the head unit now with bluetooth?

dulmer 05-02-2017 03:32 PM

Quote:

Originally Posted by roadkingedout (Post 535814)
Can you send pandora to the head unit now with bluetooth?



Not sure, as I don't use Pandora. I don't see why it wouldn't though.


Sent from my iPad using Tapatalk

CBRacerX 05-06-2017 05:34 AM

Looks great. A fine match.


Sent from my iPad using Tapatalk

dulmer 05-06-2017 05:37 AM

Quote:

Originally Posted by CBRacerX (Post 536245)
Looks great. A fine match.


Sent from my iPad using Tapatalk



Thanks!


Sent from my iPad using Tapatalk

dulmer 05-06-2017 10:59 AM

So I have now tested receiving calls with the new stereo, and it does a great job. Sound is very clear and person on other end says I am very clear as well. Overall very happy, considering it was only $180.


Sent from my iPad using Tapatalk

Cbonilla 05-06-2017 01:40 PM

I assume that this is not compatible with MOST/Bose systems

dulmer 05-06-2017 01:42 PM

Quote:

Originally Posted by Cbonilla (Post 536293)
I assume that this is not compatible with MOST/Bose systems



Not sure. Check on the Bergvill F/X website for more info.


Sent from my iPad using Tapatalk

ryanjboutin 06-11-2017 08:46 AM

Quote:

Originally Posted by dulmer (Post 535403)
So I finally got my new Continental stereo installed. By using the custom harness from Bergvill F/X, it couldn't have been easier:

1. Pull out old stereo
2. Disconnect harness from old unit
3. Remove old installation frame and install new one that comes with the stereo.
4. Connect Bergvill harness to factory harness
5. Plug Bergvill harness into Continental unit
6. Push Continental unit into frame until it locks
7. Snap on trim piece
8. Enjoy the look and sound!

I got the Bergville harness and everything connected, and the unit works very well, but I seem to be having trouble getting the bastard into the frame.

I've never had this much trouble with a head unit before, kind of baffled.
Wondering if maybe I lost a piece for fitment.

I took the metal collar off and slid the unit through the front, but the collar won't lock on the backside.
It's too big to fit into the hole in the frame with the metal collar on.

Any tips, or wtf did I miss?

FYI to anyone doing this, here is a link to the correct Bergville harness.

ryanjboutin 06-11-2017 09:35 AM

Well, never mind.

Just took a file and shave maybe 1.5 kvnt hairs off the sides until the retainer fit snug.

Probably install it after the Montreal GP.

Forza Ferrari! Go Seb!


http://986forum.com/forums/uploads02...1497202505.jpg

dulmer 06-11-2017 09:40 AM

Quote:

Originally Posted by ryanjboutin (Post 540339)
Well, never mind.

Just took a file and shave maybe 1.5 kvnt hairs off the sides until the retainer fit snug.

Probably install it after the Montreal GP.

Forza Ferrari! Go Seb!


http://986forum.com/forums/uploads02...1497202505.jpg



Yeah, sorry, I forgot that step...a little filing/trimming is necessary.


Sent from my iPad using Tapatalk

356Guy 06-11-2017 09:56 AM

Install is easy. I didn't take the whole face plate off to trim the sides. I used a Dremel with a small carbide burr which made very short work of it.

ryanjboutin 06-11-2017 12:56 PM

Done & done.

https://www.tacomaworld.com/media/li...ate=1497213111

dulmer 06-11-2017 12:59 PM

Quote:

Originally Posted by ryanjboutin (Post 540361)



Nice, welcome to the club!


Sent from my iPad using Tapatalk

vdoman_pro 07-04-2017 07:37 PM

Was just wondering if anyone installed one of these decks in 2003S with the MOST system. Bergvill F/X seems to have an adapter for the Most system.


All times are GMT -8. The time now is 05:12 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website