|
I'm tall and was able to do it all from the top. I reached the 2 bolts by leaning over the drivers side with a 10mm deep 1/4" drive socket. After I unhooked the 2 side hoses I just ripped it out without removing the lower bellows clamp. I used the new fancy clamp tool to put the lower clamp on. Easy project. New front engine mount next.
Dan
__________________
1999 Black Boxster, 2004 996 X50 Turbo, 2011 GMC Sierra, 2013 Mercedes E350, 50' Ocean Alexander with 400hp Detroits.
|
Threaded Mode
