Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 09-15-2015, 09:03 AM   #1
Registered User
 
Carlisabadman986's Avatar
 
Join Date: Feb 2014
Location: Virginia
Posts: 157
Swapping Wheels

I currently have stock 17 inch wheels with continental extreme DWS tires on them and lots of tread left. I recently purchased 18's from a forum member and I am about to pull the trigger on tires. If I get summer tires and have them professionally installed can I just swap back to the 17's when it gets cold? Will the 17's have to be professionally installed when I want to switch back?


Thank you

__________________
01 Base Arctic Silver, Top Speed Muffler and Cat Delete pipes, Ben006 Short shifter
Carlisabadman986 is offline   Reply With Quote
Old 09-15-2015, 09:20 AM   #2
Registered User
 
steved0x's Avatar
 
Join Date: Dec 2012
Location: FL
Posts: 4,143
Quote:
Originally Posted by Carlisabadman986 View Post
Will the 17's have to be professionally installed when I want to switch back?


Thank you
Absolutely not, you can jack up the car and switch wheels just like any other car. The Continental Extreme DWS is not a directional tire so it doesn't matter which side it goes on, but you may want to make a note and rotate them side to side each winter (or not, I never rotated my sumis...)

Steve

Edit: but if you are friendly with the folks that are mounting and installing your new 18's they would probably be happy to swap them out for you for low $$$ when the time is right if you have a2nd vehicle to bring the 17's and carry away the 18's when you swap them.

Last edited by steved0x; 09-15-2015 at 09:38 AM.
steved0x is offline   Reply With Quote
Old 09-15-2015, 09:24 AM   #3
98 Arctic silver 986
 
tommy583's Avatar
 
Join Date: Jul 2011
Location: Upstate, NY
Posts: 1,441
Garage
No you can do it yourself. All you need is a jack, jack stands, wheel chocks, 19mm socket and a torque wrench. You can get all that stuff from Harbor Freight for around $100 with coupons.
tommy583 is offline   Reply With Quote
Old 09-15-2015, 09:42 AM   #4
On the slippery slope
 
JayG's Avatar
 
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,793
Garage
Changing a tire on a Porsche is the same as changing a tire on any other car. If you need professional help for that, so be it.
BTW, a lot of "professionals" don't do it right, they just use an impact wrench and don't check for proper torque

Harbor Freight has a decent 1/2" torque wrench for under $12 on sale. If you search for coupons, you can find them for $12.99, sometimes $9.99. If all yo are going to use the jack for is changing tires, then one of the trolley jacks should be fine. If you plan on doing DIY stuff and need to get under the car, then you want a higher lift jack. Be sure to get a low profile one in any case. I bought their 2 ton steel one for around $60 on sale. Their 3 tone jack stands on sale are $20 also get the jack stand covers, they protect the underside of the car.

If all you are doing is tires, you don't even need jack stands

Get a 19mm impact socket, they are deeper and you may need that on some wheels. I also wrapped mine with gaffers tape (you can use duct tape) so it wont scratch the wheels. You can also find online "soft" sockets for around $30 that wont scratch the wheel or lug bolts.

You need to torque the bolts to 96 ftlbs
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
JayG is offline   Reply With Quote
Old 09-15-2015, 09:47 AM   #5
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
You can swap wheels one at a time with the factory supplied jack & tools on a paved level surface. Just buy a torque wrench that's good to 100 ft/lbs. The oe jack works very well & everyone should use it before they HAVE to use it in a potentially difficult situation.
__________________
OE engine rebuilt,3.6 litre LN Engineering billet sleeves,triple row IMSB,LN rods. Deep sump oil pan with DT40 oil.
BYprodriver is offline   Reply With Quote
Old 09-15-2015, 10:11 AM   #6
Registered User
 
Carlisabadman986's Avatar
 
Join Date: Feb 2014
Location: Virginia
Posts: 157
I have no worries about taking the tires on and off I have done that a few times in the 4 years i've owned the car and recently when I bled the brakes.

I don't know why I thought maybe there was something that needed to be done when going from 18's to 17's.

Now I just got to order the summer tires so i can get some enjoyment out of them and the new wheels before winter.

Thanks everyone!
__________________
01 Base Arctic Silver, Top Speed Muffler and Cat Delete pipes, Ben006 Short shifter
Carlisabadman986 is offline   Reply With Quote
Old 09-15-2015, 11:07 AM   #7
On the slippery slope
 
JayG's Avatar
 
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,793
Garage
Just make sure the 18's have the correct offsets. Boxster offsets are different from 911 offsets
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
JayG is offline   Reply With Quote
Old 09-15-2015, 11:24 AM   #8
Registered User
 
Carlisabadman986's Avatar
 
Join Date: Feb 2014
Location: Virginia
Posts: 157
Quote:
Originally Posted by JayG View Post
Just make sure the 18's have the correct offsets. Boxster offsets are different from 911 offsets
They came off a 986 so I think I should be good.

I'm really excited about putting them on.

Thanks!
__________________
01 Base Arctic Silver, Top Speed Muffler and Cat Delete pipes, Ben006 Short shifter
Carlisabadman986 is offline   Reply With Quote
Old 09-15-2015, 12:17 PM   #9
Registered User
 
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
Carlisabadman986, do yourself a favor and weigh your factory 17's as the come off and weigh the 18's as they go on...

I put some 18's on my car and they're significantly heavier than my factory 17's. My off-the-line performance suffered and worst of all, these great looking 18's on my car have prematurely and repeatedly worn out suspension parts.

If the 18s are a lot heavier, don't drive the car on bad roads or you'll pay dearly.
RandallNeighbour is offline   Reply With Quote
Old 09-15-2015, 12:50 PM   #10
Registered User
 
lkchris's Avatar
 
Join Date: Jan 2014
Location: Albuquerque, NM, USA
Posts: 730
It reads like you're thinking of your 17s as all-season tires good for winter.

Those in the know refer to all-seasons as no-seasons, i. e. not good ever.

Best to get true winter tires on the 17-in wheels.
__________________
Kent Christensen
Albuquerque
2001 Boxster
2007 GL320 CDI, 2010 CL550
2 BMW motorcycles
lkchris is offline   Reply With Quote
Old 09-15-2015, 12:54 PM   #11
Registered User
 
Carlisabadman986's Avatar
 
Join Date: Feb 2014
Location: Virginia
Posts: 157
Quote:
Originally Posted by RandallNeighbour View Post
Carlisabadman986, do yourself a favor and weigh your factory 17's as the come off and weigh the 18's as they go on...

I put some 18's on my car and they're significantly heavier than my factory 17's. My off-the-line performance suffered and worst of all, these great looking 18's on my car have prematurely and repeatedly worn out suspension parts.

If the 18s are a lot heavier, don't drive the car on bad roads or you'll pay dearly.
That's a great idea and i will definitely do so.

These are the wheels

http://986forum.com/forums/boxster-parts-sale-wanted/58420-18-cararra-wheel-set.html

As for the all seasons being no seasons I have to say I am pretty happy with the continentals so far. I actually considered putting the same tires on the new wheels but thought it would be cool to have a set of summer tires with a little better performance.
__________________
01 Base Arctic Silver, Top Speed Muffler and Cat Delete pipes, Ben006 Short shifter
Carlisabadman986 is offline   Reply With Quote
Old 09-15-2015, 01:19 PM   #12
98 Arctic silver 986
 
tommy583's Avatar
 
Join Date: Jul 2011
Location: Upstate, NY
Posts: 1,441
Garage
Quote:
Originally Posted by Carlisabadman986 View Post
That's a great idea and i will definitely do so.

These are the wheels

http://986forum.com/forums/boxster-parts-sale-wanted/58420-18-cararra-wheel-set.html

As for the all seasons being no seasons I have to say I am pretty happy with the continentals so far. I actually considered putting the same tires on the new wheels but thought it would be cool to have a set of summer tires with a little better performance.
\

Nope I'm sorry to inform you that those wheels will not fit your car. Your best course of action would be to send them to my house. I'll PM you the address.
tommy583 is offline   Reply With Quote
Old 09-15-2015, 01:38 PM   #13
On the slippery slope
 
JayG's Avatar
 
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,793
Garage
I have those wheels as my DD wheels. They look great on a Boxster
I bought a set of 17's for track and AX
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
JayG is offline   Reply With Quote
Old 09-16-2015, 04:22 AM   #14
Registered User
 
Carlisabadman986's Avatar
 
Join Date: Feb 2014
Location: Virginia
Posts: 157
Quote:
Originally Posted by tommy583 View Post
\

Nope I'm sorry to inform you that those wheels will not fit your car. Your best course of action would be to send them to my house. I'll PM you the address.

I have been looking for a used set of wheels for almost two years, 95% of the ones I see on this forum or Rennlist are in CA or somewhere far away. When these popped up in VA I was all over them. I Paypalled the money and had a friend scoop them up like 2 hours after I saw the post.

It was meant to be
__________________
01 Base Arctic Silver, Top Speed Muffler and Cat Delete pipes, Ben006 Short shifter
Carlisabadman986 is offline   Reply With Quote
Old 09-16-2015, 05:20 AM   #15
On the slippery slope
 
JayG's Avatar
 
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,793
Garage
My spare set was the same.
I had been looking for a while and found a set local. Drove over and picked them up.
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
JayG is offline   Reply With Quote
Old 09-16-2015, 05:30 AM   #16
98 Arctic silver 986
 
tommy583's Avatar
 
Join Date: Jul 2011
Location: Upstate, NY
Posts: 1,441
Garage
Quote:
Originally Posted by Carlisabadman986 View Post

I have been looking for a used set of wheels for almost two years, 95% of the ones I see on this forum or Rennlist are in CA or somewhere far away. When these popped up in VA I was all over them. I Paypalled the money and had a friend scoop them up like 2 hours after I saw the post.

It was meant to be

I hear you man. I've only been looking for less than a year. So maybe I'll find something close next year. Besides I've got to stop spending money on this thing lol. Well they look great and I hope you enjoy them.
tommy583 is offline   Reply With Quote
Old 09-16-2015, 08:04 AM   #17
Registered User
 
Join Date: Jan 2007
Location: BC
Posts: 1,310
As these cars use lug bolts rather than nuts, it's helpful to have the post tool that screws into a bolt hole to let you hang the wheel on the hub until the other bolts are out/in. The tool is part of the standard tool kit that came with the car.

Interestingly, my VW, which also uses bolts, doesn't have the post tool, so I use the one from the Boxster.
__________________
2001 Boxster, 5 spd, Seal Grey
clickman is offline   Reply With Quote
Old 09-16-2015, 08:22 AM   #18
On the slippery slope
 
JayG's Avatar
 
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,793
Garage
I have the tool, but never use it. Just have to be a little careful when removing or mounting the wheels.
Once you have the wheel on the hub, it supports the weight so you can put in the lug bolts

__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
JayG is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page