Ignition switch

[clb0099]

Well , I figured the fact that my car is a 97 with 94k miles that eventually my is going to go so i saw this on ebay and it was really cheap so i figured why not get it now then later. There are two things I have bought in prevention I bought
rms seal and now this.


http://cgi.ebay.com/ebaymotors/New-Porsche-Carrerra-996-Boxster-911-Ignition-Switch_W0QQitemZ120131905831QQihZ002QQcategoryZ336 91QQrdZ1QQcmdZViewItem

[SRQ Boxster]

Performed this repair today with the Audi switch and the link provided by makler. I had to order the switch from my local dealer ($35.00). Installation write-up was right on. The only step I did not perform was the removal of the drivers seat. I did have to "create" a driver to perform the removal of the two small set-screws that retain the switch to the housing. Used a 1/8" driver bit and an old R/C truck, wheel lug removal tool to access the screws. This was an easy DIY project if you don't want to pay the Dealer for the repair.