986 Forum - The Community for Porsche Boxster & Cayman Owners
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Performance and Technical Chat (http://986forum.com/forums/performance-technical-chat/)
-   -   x51 vs EBS & hard headed Germans (http://986forum.com/forums/performance-technical-chat/32201-x51-vs-ebs-hard-headed-germans.html)

Gilles 01-04-2012 05:53 PM
Quote:
Originally Posted by Brad Roberts (Post 272414)

Dry sump? Anyone?

I have the pan designed and already have a pump. Just no time to figure out HOW to run the pump. There is not a lot of room in front of the crank shaft to run a drive pulley... even after removing the ebrake cable guide!!

B
Hey Brad,

If you install an electric steering pump (GT3..type?) perhaps you may have enough room to install pump for the dry sump..?

.

MaxD 01-04-2012 06:17 PM
Or an electric pump for the dry sump...

Brad Roberts 01-04-2012 07:36 PM
Dry sump pumps need to be mounted as low as possible to scavenge the engine and pull oil from the remote tank

This is our GrandAm Nissan VQ35 engine on the dyno 2-3 years back..


http://986forum.com/forums/uploads01...1325738202.jpg

This system in its mounting location did not work, we had to change to... this...


https://www.fontananissanracing.com/...mg_7333_sm.jpg

Brad Roberts 01-04-2012 07:42 PM
The pump is now part of the pan.. custom pan.. custom pump.. 5-7k


All times are GMT -8. The time now is 05:08 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website