Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 06-18-2010, 11:10 AM   #1
Engine Surgeon
 
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
I'd need to do at least 4 retrofits.. I'd rather do a total of 6 to make it worth my time away from the shop and to recover from the 26 hours in the air!
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist
Jake Raby is offline   Reply With Quote
Old 06-18-2010, 09:12 PM   #2
Registered User
 
Join Date: Jun 2009
Location: Australia
Posts: 105
Want a deposit now?
I am sure we could get 6 people together for IMS retrofits.
What is the going price for them in AUD$.
Pinarelloman is offline   Reply With Quote
Old 06-19-2010, 03:08 AM   #3
Engine Surgeon
 
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
What the charges will be would be dictated by the shop that we'd be doing the work in.. I'd rather have a chassis dyno available for before/ after comparisons..

Costs would be around 3K US for my full service, including tensioner cleaning/ replacement and internal inspections.

Get 6 cars together and I'll start looking for a place to work. I can bring all the parts and tools with me. Once the 6 cars have been rounded up we'll get deposits, probably just enough to cover my air fare, the rest we can do while I am there.

I should have one of my engine assembly classes while I am there, I have several Aussies interested in attending them here, there would be better.. But I would need an M96 engine out of a car for this.
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist
Jake Raby is offline   Reply With Quote
Old 06-19-2010, 09:34 PM   #4
Registered User
 
Join Date: Jun 2009
Location: Australia
Posts: 105
Jake, you are obviously very busy with your work over in the USA. Do you have any preferred time frame for coming over here? Eg Christmas etc or is there another time when business is quiet.

It sounds like Steve is a starter for the IMS upgrade & I am also.
Can your mate who works on air cooled Porsche's get another four starters? I would also be interested in assisting with the work on my vehicle if possible.

PS Don't drink the beer in Queensland it is spelt XXXX & tastes like cats P
Though we lost the State of Origin to them (again)
Pinarelloman is offline   Reply With Quote
Old 06-20-2010, 04:48 AM   #5
Engine Surgeon
 
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
January would probably be best.. I have scheduled M96 engine assembly classes in November, December and February..

I'd think we can find 4 more pretty easily in the next few months..
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist
Jake Raby is offline   Reply With Quote
Old 06-20-2010, 10:25 AM   #6
Registered User
 
Join Date: Jun 2009
Location: Australia
Posts: 105
OK January is fine for me. Hopefully Steve will read this soon....
Pinarelloman is offline   Reply With Quote
Old 06-21-2010, 01:37 AM   #7
Registered User
 
Steve Tinker's Avatar
 
Join Date: Dec 2008
Location: Queensland, Australia
Posts: 1,522
OK guys, sorry for the delay. I have just spoken to the Finance Minister (I'm married to) & got the OK for the upgrade by Jake.
Anytime would be fine for me - I can work around the dates but need to know which major city the revamp is going to take place......
Jake / Pinerelloman, I don't know if we have to use this forum for the (finer) details of the potential upgrades, but the ball is in your courts. You can contact me via a PM anytime you have a few minutes to spare.
__________________
2001 Boxster S (triple black). Sleeping easier with LN Engineering/Flat 6 IMS upgrade, low temp thermostat & underspeed pulley.
2001 MV Agusta F4.
Steve Tinker is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page