|
It is not that difficult a project, even with the car sitting on jack stands. You are going to need some tools (a way to support the engine while you pull the gear box, a second supporting device or jack to carry the gear box, a good torque wrench, a 10MM triple square socket for one of the tran’s bolts, etc.). Not difficult, but sufficiently involved that you need a good reference manual to guide you through the process if you have not done it before………..
__________________
“Anything really new is invented only in one’s youth. Later, one becomes more experienced, more famous – and more stupid.” - Albert Einstein
|
Threaded Mode
