Fabspeed vs NHP cat-bypass pipes

[ChrisZang]

Originally Posted by gwoodburn

Did you do the install? If so, how did it go and how does it fit? Are my eyes not deceiving me that the Fabspeed pipes are not bent the same as factory pipes? Does this cause the pipe to come unusually close to anything that could possibly have a problem with the heat of the exhaust? I know it is very tight under there and I am kind of worried about how close they come to hitting something or if heat is an issue.

I installed my fabspeeds myself, if everything goes w/o a hitch maybe 4 ~ 6 hours.
Well, I needed a few days (see below)
1) Dependent on how much rust is on the bolts you might want to have some WD40 soak in overnight.
The pipes don't come close to anything to create a heat problem.
2) The weird thing with my car was that one pipe had to be cut by about an inch to fit, but I remember that I had similar fitment problems when installing a GHL muffler, so I almost think that there is something odd with my exhaust piping.
3) Oh yes: You will be able to re-use 5 of the 6 bolts that connect the primary cats with the secondary cats, but you'll need to buy one extra:
5 of the 6 bolts are just bolts while the 6th bolt is welded to the pipes for the secondary cats (don't ask me why)

[Lobo1186]

here is a video of my cat delete in action


sorry about the quality. these pipes cost me 40 bones and I have a debuloz muffler.

[jhandy]

well considering they are both empty pipes, I can imagine why one would be better than another.
Why would they sound or perform different. I have fabspeed, only because the NHP was not sold at the time. I went to a muffler shop and asked them to make me a pipe, and they refused because it removes a cat and for some reason that it illegal. Fabspeed pipes are way too expensive for what they are, that said they sound, fit and perform great.

[23109VC]

lobo-

sounds cool!! great little video..eveni f I canonly the see the cars behidn you, I culd hear it fin!

i like that. how did you get a mufler shop in CA to do the work for you? since most of them are so uppity about changing anythign to violate smog..

did you take the pipes off and hten have them bend pipes the same shape...and you did the uninstall / install...or did hte shop do all the work for you?

is yours a 2.5 / 2.7 / or 3.2?

sounds awesome. i like hte muffler sound...does it drone a lot?

did the sound of your exhaust change much after you put on the b ypass pipes? or did it sound not much different...

[Matt Fredrikson]

I've looked at a few options and decided I'm going to have a set custom fabbed. The speed shop that did all the custom work on my Talon is going to do it for me. I just can't justify spending the money on fabspeed pipes when I can have a custom SS mandrel set done for half the price.

[Lobo1186]

Originally Posted by 23109VC

lobo-

sounds cool!! great little video..eveni f I canonly the see the cars behidn you, I culd hear it fin!

i like that. how did you get a mufler shop in CA to do the work for you? since most of them are so uppity about changing anythign to violate smog..

did you take the pipes off and hten have them bend pipes the same shape...and you did the uninstall / install...or did hte shop do all the work for you?

is yours a 2.5 / 2.7 / or 3.2?

sounds awesome. i like hte muffler sound...does it drone a lot?

did the sound of your exhaust change much after you put on the b ypass pipes? or did it sound not much different...

mine is a 2.7 and im trying to get a setup where i can leave a mic at that location over the muffler and put my camera (HD HERO) in a more interesting (usefull) spot but if you wanna see how the camera works you can check out some of my other youtube vids.

now as far as the pipes are concerned i just brought cash... which i hear is king.

as far as sound it is much louder but it is nice and raspy. drone is mostly gone it was moved to low RPMs around 2000 on the highway. which for me is rare so it doesnt bother me. it used to drone right at cruising speed before the delete so that was also a great benefit (albeit luck)

[gwoodburn]

Originally Posted by jhandy

well considering they are both empty pipes, I can imagine why one would be better than another.
Why would they sound or perform different. I have fabspeed, only because the NHP was not sold at the time. I went to a muffler shop and asked them to make me a pipe, and they refused because it removes a cat and for some reason that it illegal. Fabspeed pipes are way too expensive for what they are, that said they sound, fit and perform great.

Im not sure, but does a 2002 have the primary cats on the headers? I know that with earlier models the primary cats are on the midpipes which would explain why the shop did not want to remove it. Just a thought.

[Lobo1186]

after 2000 they had 4 cats 2 on the headers and 2 on the mid pipes. so its a double whammy

[gwoodburn]

Originally Posted by Lobo1186

after 2000 they had 4 cats 2 on the headers and 2 on the mid pipes. so its a double whammy

Double whammy indeed.

I knew it was either 2000 or 2003 that they made the change.

I just dont think jhandy's guy knew what he was talking about or understood how the car was set up. The midpipe cats are pretty useless and I really dont see why it would be illegal to remove them. MY97-MY99 only has one set so what would be illegal about changing MY00-MY04 to have only one?

[gwoodburn]

When I got the car, I had to rebuild the axles. Instead of disconnecting the suspension to get the axles out, I dropped the mid-pipes. So I am well aware of these stupid welded bolts. I already went through the process of cutting and grinding them off when i broke one of the rusted bolts trying to get it out leaving me with no other option. It was a real PITA, but i still think it was easier than disconnecting the ball joint on the wheel carrier.

So you had to cut one of your pipes? had your car been in an accident that would cause the exhaust piping to be wacky?

[ChrisZang]

Originally Posted by gwoodburn

So you had to cut one of your pipes? had your car been in an accident that would cause the exhaust piping to be wacky?

Not that I am aware of. I bought the car with less than 15k miles and carfax was fine.
Also if you eyeball everything it checks out fine. Kind of a mystery

[jaykay]

....I had to cut one of my pipes too

[jmatta]

I installed Fabspeed bypass pipes a few years back...no rusted bolts and the fit was perfect, once you loosen up the muffler U-pipes. My car only had about 13k miles at the time, so it was quite an easy job.