License Plate LED'S ect....

[Johnny Danger]

Originally Posted by Cartel

Hoen

http://www.hoen-usa.com/licenseplate.htm

They are currently out of stock until the 14th of this month and are highly reccomended as they are a sure fit plug in with minimal hassle. I am awaiting mine on the 14th.

e/ It will not require any of the hassles of past where it was required to solder resistors, capacitors, and inline wiring.

Thanks Cartel. By the way, it looks like you have one hell of a nice mod'd 986 S.

[Cartel]

Originally Posted by Johnny Danger

Thanks Cartel. By the way, it looks like you have one hell of a nice mod'd 986 S.

Thanks a lot. Although it was never said you have an extremely well put vehicle and the turn out was phenominal. I've been on the phone an awful lot lately to straighten a minor mishap with my ECU at FVD with Rhonda and she had nothing but the nicest of comments about you. Well done and thank you for going the next mile in regards to your mods that not very many will do. Enjoy it in the best of health my friend.

[Kirk]

So C5W is the correct bulb type? Does it have to be 37mm? Ebay has a ton of these much cheaper in the 36 and 38mm sizes. My OEM bulb is exactly 37.38mm, so I'd guess the 38 mm bulbs would fit fine.

Do a search on eBay for C5W LED and you'll see about 90 products available. I think I'm going to see if the cheap Chinese supplier on eBay I used for my LED city lights has these. They gave me pretty good service.

Kirk