Help required with interior trim!

[Christian H]

pulled the instrument pod out this afternoon as the bulb behind the clock had blown, while I had it in bits I decided to upgrade with blue neons too (gave it a good clean inside as well) anyway with my head upsidedown in the footwell and a flexy spring shafted driver I managed to remove the screws on both the short pieces I even used the screws to fix the silver ones back on!
Just the long strip to do now,so time permitting tomorrow airbag out and job done.

[Christian H]

Finished the job today,took the foam padding and side vent tube out and was suprised to see that all the screws for the long trim where visible,no need to take out the airbag(maybe because of UK spec?)took lots of pics during and after installation if anyone is interested I will try and post them.
Thanks for everyones advice, I think thats what gave me the confidence to tackle it in the end!

[ddb]

Christian,

Glad to hear you were successful!

I believe removing the airbag would have allowed you to gain access to the screws sitting in the passenger seat versus reaching them from underneath the dash. The important thing is you were able to get to them.

I would love to see some interior and exterior pictures of your car.

Thanks,

ddb

[Christian H]

I'm sure it would have been far easier sat in the passenger seat and removing the screws, then my legs over the roll bar, arms above my head and head pushed into the footwell !!(I will do that next time!)will post interior pics as soon as my son shows me how to do it!the quality may not be too great as I used my N95(it was in the car at the time)I will be posting some exterior shots on show and tell when I can get out and take some as the weather is pretty crappy at the moment rain,rain and more rain.I must warn you the colour of my car does get some negative comments from the general public over here as it is peppermint green (same as the 964RS colour) but I love it and it is the original special factory option.It would be a dull world if all Boxsters where silver or dark blue!

Catch you later ddb

And thanks for your interest.

[chaudanova]

Originally Posted by Christian H

I'm sure it would have been far easier sat in the passenger seat and removing the screws, then my legs over the roll bar, arms above my head and head pushed into the footwell !!(I will do that next time!)will post interior pics as soon as my son shows me how to do it!the quality may not be too great as I used my N95(it was in the car at the time)I will be posting some exterior shots on show and tell when I can get out and take some as the weather is pretty crappy at the moment rain,rain and more rain.I must warn you the colour of my car does get some negative comments from the general public over here as it is peppermint green (same as the 964RS colour) but I love it and it is the original special factory option.It would be a dull world if all Boxsters where silver or dark blue!

Catch you later ddb

And thanks for your interest.

Hi, would you be able to post some pictures please? I'm interested in doing this mod!

[Christian H]

Originally Posted by chaudanova

Hi, would you be able to post some pictures please? I'm interested in doing this mod!

I'll see what pictures I can find and post them over the weekend,since this first post I have actually changed them again from silver to exterior body colour, the second time took less then an hour from start to finish,this mod was a lot less daunting then I first thought.

[ddb]

chaudanova,

I was so focused on the task when I installed the horizontal strips (and some other parts) I didn't even think to take any pictures, sorry.

Here are a few pictures of my interior.

ddb

[Christian H]

Originally Posted by chaudanova

Hi, would you be able to post some pictures please? I'm interested in doing this mod!

Could not find any pictures from when I changed the trims over, but I took these pictures today to give you a good idea of how to tackle the mod,there may be slight differences between left and right hand drive cars and maybe the age of car but I would assume they should all be very similar.

These are the silver trims that I removed,they show the screw holes and clips on the rear

Firstly remove the foam cover under the dash,this is held with two plastic screws

Next pull the air vent tube down(squeezing it together at the same time helps)

This will allow access to the torx screws

The weapons of choice,flexy driver and hand light.

Seven torx screws in total(size T10) on the passenger trim,the silver item in the picture is the air bag(there are two screws on each of the drivers side trims)


Then its just a case of undoing all the screws,as ddb stated take your time and take breaks if you get fustrated its well worth it.

The drivers side is the same set up with two screws in each,if you need help send me a pm.

[Christian H]

Here is a couple recent picture I took after a bit more trim painting.