|
Some items to think about
1) Wheel Offset
2) Is the car lowered or not?
3) Camber setting
4) Rolled fender lips.
Yes, a 10" rim can fit, but you need to consider the above.
Porsche DID offer a 9x18 wheel for the rear of the boxster. Factory tire size was 265 width... I ran 275/35-18 rears. You might use this factory size and place a small spacer (5mm or less) to help fill out the rear fenderwell, if that was a goal.
__________________
1976 914 2.0
2000 Boxster 2.7 (sold)
1978 911 SC (sold)
1970 914 w/2056 (sold)
|
Threaded Mode
