Removed Intake Muffler, Sounds great!

[edevlin]

'Am I missing something here? Is the resonance box just a muffler to reduce intake noise or is it an important part of the factory tuned intake. With a properly tuned intake, sonic waves from the intake pulse combine with airflow to force charge the cylinders as much as 125% of airflow alone. Porsche has been tuning this for a long time to give us better top end power and that nice big fat torque curve that gets us out of corners quickly.

I don't know the answer to this, just raising the question. Tuning an intake/exhaust is a lot more like tuning a musical instrument than we realize. It would be disappointing to remove the res. box and get a narrowing of the torque curve and lose 10hp in the process. Faster good, Slower bad! Any Porsche racing techs in the know on this? '


I added a TTP intake which effectively deleted the muffler, at the same time I had the car chipped, so I dont know what effect the change in the intake alone had on the cars performance. When I dynoed it after the intake and chip combination, I picked up about 20hp, then picked up another few with headers on my 2.7. I have a photo of the intake tube at my website below my signature.

Ed

[Brad Roberts]

Anyone recall the Excellence article where they pulled the pants down on EVO's intake tubes?? Ha ha the car's made LESS hp than stock?? If it isn't raining here in SoCal, the car will go to dyno Tuesday.

How about you ask TTP to show us their finding's? Surely they tested the stock components so they could improve on 100's of Porsche engineers work (partially being sarcastic) I just get tired of the BS claims by armchair engineers who make something for our cars and never thoroughly test it.. but release it. Kinda like MickeySoft.



B

[edevlin]

"How about you ask TTP to show us their finding's? Surely they tested the stock components so they could improve on 100's of Porsche engineers work (partially being sarcastic) I just get tired of the BS claims by armchair engineers who make something for our cars and never thoroughly test it.. but release it. Kinda like MickeySoft."

Good point, I was quite suprised to what claims were made by many companies for performance enhancements to our cars. I think the TTP intake I am using was really designed for their twin turbo mod, which could use the higher flow rate that the intake provides.

Based on my experience, TTP seems to be making pretty reasonable claims for their performance enhancing products. They say you should get about 25hp when you use the combination of their intake, exhaust and chip. Those numbers are pretty much what I got on the dyno when I added them all to my car.

That beign said, in hindsight, I would be suprised if the stock intake on 2.7L cars offers much restriction in airflow, even if cars are fitted with modified exhaust systems, but it sure sounds sweet....


Ed,

[jaykay]

Early on in this thread (1st page) there was a diagram posted showing clamp #4 and a small hose teeing off the main intake pipe. What is this for and how do the after market pipes handle this?

[Shehadehd]

Originally Posted by jaykay

Early on in this thread (1st page) there was a diagram posted showing clamp #4 and a small hose teeing off the main intake pipe. What is this for and how do the after market pipes handle this?

I'd like to second this question. I'm looking to put the 2.5l intake on the 2.7l but I noticed some engines with the auxiliary tube and some without? I'm not sure what to put into google to find some literature on it. Anyone have a clue what it's for?