Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-08-2008, 03:06 PM   #2
Registered User
 
Join Date: May 2007
Location: SoCal
Posts: 188
Then I removed the cone shaped plastic piece which i will not use for this project also i marked with blue arrows 3 small metal pieces that need to be straightened to make the hole slightly smaller so that the switch would hold securely. This step is done much easier if the whole metal piece is removed all i did was just wiggle it around and pulled it out.


Here is a picture of the button installed in that metal piece that i removed.


Me working


Here i soldered 2 wires to a switch, drilled small hole for LED and installed it


Made 3 holes marked with arrows for wires to pass
blueillusion97 is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:35 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page