Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-07-2008, 09:55 AM   #10
Registered User
 
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
Send a message via MSN to CJ_Boxster
If you are hearing a loud metalic chatter noise in your suspension while rolling over bumps, it could be very likely your Front & Rear Upper control arm/Track Arm bushing cartridges are worn out... I use to have a metalic chatter coming from my suspension at low speeds of 50mph or lower while rolling over bumps or cracks in the road... Turns out my front and rear track arms were worn out. I replaced them with adjustibles from Delubozparts (forum sponser). The Adjustibles are a cheap alternative at $269 a set, to buying OEM non-adjustible units at $600+ a set.

Also, if you plan on lowering your Boxster you will run in to issues with rear Toe and the factory toe links not having enough adjustibility to correct that, so by using the Rear Upper Control Arm/Track Arm (Caster) adjustibility you can correct the excessive positive toe you will have from lowering the car.
__________________
--Proud Boxster Owner/Tech,

Carlos J Cazares

FastForward Performance
http://i10.photobucket.com/albums/a1...er/newsig1.jpg
CJ_Boxster is offline   Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page