Boxster intercooler???....

[Gary in BR]

I'll get under there and measure the inlet and outlet today. And the 3 dimensions of the IC

The Turbowerx web address is http://www.turbowerx.com/ There he has pictures of intercoolers and pipes.

My ECU has been reprogrammed. No add on software or piggy back. I am actully expecting a new ecu any day now. (need a little more power)

If your looking for more power JAAY was investigating adding methonal injection to his supercharger setup. This is the company he referred me too: http://www.snowperformance.net/

Also there is the idea of spraying the intercooler with nitrous. From my understanding spraying the intercooler with nitrous lowers the intake temperature even more. I am afraid of the research on the nitrous spray of the IC because if it sounds promising then I will figure a way of mounting a spray onto my IC.

A quick google search
http://www.fastwrx.com/nterinchil.html
http://www.watson************************************************************************************************/servlet/Categories?category=NOS%3ATurbos%2FSuperchargers%3 AIntercooler+Spray+Bar+Kit


I hope any or some of this helps, and I will post the measurements sometime today.

[pk2]

Originally Posted by Gary in BR

I'll get under there and measure the inlet and outlet today. And the 3 dimensions of the IC...I hope any or some of this helps, and I will post the measurements sometime today.

-------------------------------------------------------------
Hey Gary,

Thanks, no need to be super precise, ballpark is fine. The more I learn about IC’s the more complicated it gets, should be a no-brainer. I do think you do indeed need more power with a new ecu.

I’ve thought a bit about methanol/water injection & nitrous (great coolant), but I think I’m more inclined towards solutions that are seamless and permanent. Mixing up my own 93-95 oct. brew out of pump and race fuel is enough for me I think.

Thanks again, PK