![]() |
Radio Fade
Hello Again,
I recently purchased a 1998 Boxster with all the goodies & extras. One of the extras was the 10 disk CD changer. I have a question about the changer / control unit. The units themselves work great! But when I forward to the next song the stereo / CD player fades the song in - thus I miss 1 or 2 seconds of the beginning of the song - almost as if the volume is turned up. I would really like to hear the whole song... I have read the owners manual inside and out trying to solve the problem - even checking into the volume control with no luck. Once again... if there is anybody out there who can help out... Thanks much! Greg |
Porsche did not offer a 10 disc changer. Becker and Sony did. Do you have a picture.
|
I made a mistake - it's the 6 disc changer. I drank too much cough syrup when I wrote the last posting.
Anywho, the problem still exists. Whenever I change CDs or forward/ reverse to another song it fades in instead of just playing. Any ideas? |
It has been said there is a soft start on the radio cd player where you miss a second or two of the intro, so you do not get blasted with sound. I do not remember if this applies to the changer, but I suspect so.
I have the 210 radio with the single cd player and the Becker/Porsche 6 disc cd changer in the trunk. I do not notice this "soft start" on my music cds, but what I listen to does not start out loud. I think the fade in feature is normal. |
Hey TP,
You really seem to know your stuff! Now... is there a way to turn that fade option off or is this a factory default? If so... Bad Porsche! G |
I do not know of any way to turn it off. This subject was covered on the old Becker board a few years ago. You might want to check the old board and see if there is any info.
http://www.beckerautosound.com/wwwboard/wwwboard.html |
All times are GMT -8. The time now is 12:22 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website